What is the delivery standard for industrial buildings?

A, industrial plant civil steel delivery standard

1, workshop production area

Indoor ground completion (1), 3: 7 lime-soil cushion, concrete ground structure layer and cement mortar surface layer.

(2) The external maintenance wall is made of glass wool composite color steel plate in the form of concealed purlin; Roof maintenance adopts the form of glass wool composite color steel plate and dark purlin.

2. Factory office area

1) Complete the concrete structure cushion on the ground and paste the floor tiles on the ground (the color and style of the floor tiles shall be confirmed by Party A);

2) Complete the plastering of cement mortar on the wall, with gypsum as the base of the wall decoration surface, and brush the water-resistant putty twice before brushing the white interior wall coating.

3) The ceiling is light steel keel gypsum board ceiling, plastering is based on gypsum, and white interior wall coating is finished after twice waterproof putty.

4) The toilet floor is completed 1.55mm thick waterproof coating and waterproof coating cement mortar protective layer, and the floor tiles are pasted (the color and style of the floor tiles are confirmed by Party A); After the waterproof coating (height 300mm) and the overall roughening of the wall surface are completed, the wall tiles will be pasted on the wall surface (the color and style of the tiles will be confirmed by Party A).

3, outdoor aproll outdoor plain concrete aproll facing, surface calendering, sub-warehouse caulking asphalt sand.

4. Outdoor steps and ramps: plain concrete steps and ramps, and the surface of the steps is leveled with cement mortar.

Calendering; Cement mortar on the ramp surface should be leveled and calendered, and anti-slip strips should be made.

5. Doors and windows in the production area of the factory building: all are plastic steel doors and windows, white plates, single-layer glass, complete hardware installation, and screen window fans attached to the external windows;

6. Doors and windows in the office area: the windows are plastic steel windows, white plates, single-layer glass and complete hardware installation. The interior door is made of wood plywood with complete hardware installation; The outer door of Type A office area is a tempered glass spring door.

Second, the industrial workshop electrical delivery standards

2. 1. The main distribution box is set in the workshop production area and the high-voltage standard workshop production area in the office area. Power comes from the low-voltage distribution box of transformer in the factory, and distribution boxes with different capacities are reserved for the owner to distribute equipment power; Metal halide lamps (150W) are used for workshop lighting to meet the requirements of workshop lighting; Office lighting shall be equipped with fluorescent lamps (2×36W) and power sockets.

2.2. The production area of weak current standard workshop should provide telephone interfaces in the workshop production area and office area. A weak current room is set in the office area of the factory building according to the characteristics of zoning combination, which is used to introduce and distribute TV (a little), telephone and network (a pair of telephone and network is 8- 10 square meter).

Three, industrial plant heating, fire protection, water supply and drainage system delivery standards

3. 1, heating system The heating system in the workshop, production area and office area is installed in place to meet the use conditions.

3.2. The fire protection system of the fire protection system workshop is installed in place to meet the fire protection function.

3.3, water supply system

The water supply system of men's and women's toilets on the first and second floors of the A-type factory building was installed in place to achieve the function of use. Its squatting pan, urinal and washbasin are installed in place to achieve the function of use. Throw tee and plug on the electric water heater; DN 15 thread stop and core porcelain cold water nozzle are installed in the riser connecting the mop pool, and the finished mop pool is installed in place (Party A confirms the style and material).

The toilet water supply of Class B and C workshops is installed in place to achieve the use function. Its squatting pan, urinal and washbasin are installed in place (the material and style shall be confirmed by Party A); Throw tee and plug on the electric water heater; Install a DN 15 thread stop and core porcelain cold water nozzle on the riser connecting the mop pool, and install the finished mop pool in place (Party A will confirm the style and material).

3.4. The domestic drainage pipe of the drainage system adopts U-PVC drainage pipe, which connects the squatting pan, urinal and washbasin, and sanitary ware is not installed. The rainwater drainage system is installed in place at one time to meet the use function.

Four, the standard industrial plant rental property fee standard

4. 1, the property fee includes: security fee, cleaning fee and engineering maintenance fee (the specific content is agreed in the lease agreement).

4.2. The heating fee for standard factory buildings and supporting facilities shall be charged separately (the specific charging method and amount shall be agreed in the lease agreement).