How to check the water and electricity when checking the house? What if there is something wrong with the house inspection?

After acceptance, we should pay attention to the construction drawings of the water circuit, which should be consistent with the actual situation, because the drawings are the basis for future maintenance. Today, Bian Xiao will come with you to see how to check the water and electricity during the house inspection, and what to do if there are problems in the house inspection.

First, how to check the water and electricity when checking the house?

1, the conduit should be unblocked, and the wires in the conduit should be pulled back and forth by hand to twitch, so as to replace the damaged wires in the future. Check the wiring sequence of socket with electric pen or socket detector, which must be left zero and right fire ground wire.

2. Check the test button of the leakage protector or use the socket detector to check the leakage protector. Be flexible. Using an insulation resistance meter, the insulation resistance of each loop should be not less than 0.5m ohm.

3, open the main valve, hand touch the water supply and drainage pipe joint should be tight, no leakage, drainage should be smooth. If the floor tiles are found to be unqualified after construction, the wires and pipes are blocked, the water heating pipes are blocked and leaking, they can only be reworked.

Second, what should I do if I encounter problems?

1, small quality defect

If there are some small quality defects, such as empty drum in a relatively small area, insufficient door and window fittings, inflexible opening and so on. These problems can be directly reported to the owner or developer for handling, and the owner or developer will arrange special construction personnel to carry out the maintenance work of the problems.

2, relatively large quality problems

Larger quality problems refer to problems that directly lead to the owner's failure to complete occupancy, such as water leakage in the house. If the owner hasn't finished the formalities of closing the house, then the owner can request to refuse to close the house according to law at this time, and then go through the formalities after the developer has rectified all the quality problems.

3. Serious security structure problems.

The third problem is the cracks and exposed tendons in the house. At this time, the owner has the right to ask the developer to find out the reason as soon as possible, and ask the national professional appraisal department to issue a report to prove whether there are serious structural safety problems in the house.

For those processes whose unqualified construction will have a serious impact on the whole process, they must be inspected after completion.