What is the national standard for elevator room temperature?

What is the national standard for elevator room temperature?

Elevator is divided into organic room and inorganic room. The computer room is just a name, it is the place where the host computer is installed. Basically, it exists on the top floor of this elevator. It is a very small room, only specialized maintenance personnel and property can enter. Internal main equipment is an important part of controlling elevator operation. In the technical specifications of elevator manufacturers, the temperature of the machine room is usually specified, which is generally 5 ~ 40℃. In practical work, ensuring the temperature of the machine room within the above range is beneficial to the safety and service life of the elevator.

In order to ensure the normal operation of the elevator, the elevator machine room is generally located at the bottom of the building. So in this room, there will be a lot of wires and machinery, and in this narrow space, heat will be generated. Exceeding this temperature, or falling below this temperature, may lead to elevator failure, and maintenance personnel need to be found in time.

In the elevator room, there are usually devices to adjust the temperature and humidity. However, the temperature and humidity of the air conditioner are fixed. When the temperature is high and humid, the temperature will automatically drop. Therefore, there must be a set of temperature control system in the environmental control of elevator machine room.

The system realizes real-time monitoring of environmental temperature, humidity, air conditioning status and operation mode through the combination of "sensor+environmental control host+alarm module". Employees can know the temperature and humidity of the elevator machine room in real time, and can automatically adjust according to different conditions such as high temperature and low humidity, and carry out remote control and management.

Using a set of temperature control system can not only detect the abnormality of temperature and humidity, but also remotely adjust it at any time to make the temperature reach the specified temperature and humidity standard, thus improving the reliability and service life of equipment and reducing the loss rate of equipment.