Job Recruitment Website - Property management company - How to detect the water pipe rupture in the wall?

How to detect the water pipe rupture in the wall?

Use a manual pressure test pump. If the water pipe is broken, you can find the leakage point of the concrete water pipe directly on the cut wall. After removing the redundant wall bricks, clean up the floating soil and sundries on the pipe root, clean up the sundries on the pipe, and find the leaking parts.

Users should pay attention to the fact that the kerf should be sanded flat, and the joint should be covered. The newly bought sewer joint and the old water pipe joint can be connected together, or the new water pipe joint can be wound around the old water pipe joint. Users are using the hot melting device to melt the new pipe.

Extended data:

Precautions for using water pipes:

1 and PR water pipes should be cooled for a period of time after blowing, usually about 10 minutes. Don't water it immediately, or it will affect the quality of the water pipe.

2. If the water pipe is seriously damaged, you can wrap the damaged part with a towel. This can not only prevent water from spraying around, but also introduce water into the placed bucket to avoid huge waste. You can also close the valve of the main water pipe and completely cut off the water supply to the family.

3. If the water pipe bursts due to aging, the user should consult the plumber for inspection and maintenance in time.

4.PPR water pipe has weak ultraviolet resistance, and it is easy to age and degrade when exposed to ultraviolet light, especially when it is opened outdoors. Users must end the dark protective layer, and the service life will be greatly reduced if the protective cover is not installed. At the same time, shielding measures can also reduce algae breeding moss in water pipes.