15 Precautions for new house acceptance There are also detailed steps to teach you how to accept.

Before moving into a new home, the last test faced by the owner is the house inspection, so the owner should do all kinds of strategies before the house inspection, carefully check and accept, and leave no dead ends. What steps should be taken to inspect the house? What problems should we pay attention to? Next, I will bring you information about the matters needing attention in the acceptance of new houses. Let's have a look.

I. Precautions for viewing the house

1. Did the entrance door knock against the paint?

Check the entrance door carefully for bumps and paint. Strictly speaking, the inside, outside and top of the door body must be painted. The gap between the door and the door should not be too big, and there is no special sound when opening and closing the door. The four sides of the door should be close to the door frame, and the gap on one side of the door lock should not be too big. At the same time, don't forget to try the lock, mainly to see whether the key is easy to use and whether the door lock is firmly installed. Another thing to note is the sound insulation effect and sealing degree of the door.

2. Is the floor level?

Check whether the floor is flat, just use a long ruler (or a special ruler with a level) to check whether it is flat, and at the same time observe whether there are scratches and cracks on the wall, and whether there are explosion points (the quicklime is not evenly mixed and distributed when it matures).

Rubbing it on the wall will form a burst point. When you hit the "explosion point" with iron, you will find quality problems such as loose and falling off in a large area. 3. Are there cracks in the wall?

Check whether the wall is flat, and also check whether there are cracks on the wall (four common cracks: strength cracks, settlement cracks, temperature cracks and deformation cracks), and whether there are exposed barbed wire and steel bars. (Tips: If the above wall problems are found during the house inspection, the developer can help to repair and sign. )

4. Are there any defects in the indoor stairs?

Look at the flatness of the stairs and see if there are any flaws.

5. Is the installation track of doors and windows flat?

First, check whether the track of doors and windows is stable. Especially the owners of casement windows must pay attention to whether they can be closed tightly. Otherwise, the wind will enter the room, especially in the cold north. (Tips: If these problems are found during the re-inspection, inform the developers directly, and they will fix them soon.

If it has been signed, then find the developer to deal with these problems. Then their efficiency is turtle speed. Secondly, check whether the door and window glass of the new house is damaged and whether the window frame is deformed. If there is any abnormality, please find the developer to solve it. This is a matter that needs your attention very much, especially the doors and windows of each room should be carefully checked to avoid unnecessary economic losses.

6. Is the balcony equipment damaged?

Mainly depends on whether the floor of the balcony is flat, followed by whether the window equipment of the balcony is in good condition.

7. The height should not be less than 2.8m

The building height of a building is generally 2.8 meters, and the actual height cannot be less than 2.6 meters. The actual height of a 3-meter-high building cannot be less than 2.75 meters, but the height of a residential building cannot be less than 2.8 meters.

8. Is the water supply complete?

Matters needing attention in checking water supply mainly depend on whether each water faucet in the room has water supply and whether it is fully equipped.

(including the faucet of the tube well in the corridor). 8. Is the water supply complete?

Matters needing attention in checking water supply mainly depend on whether the water pipes and faucets in the room are supplied with water and whether they are complete (including the faucets of tube wells in the corridor).

9. Is the drainage normal?

After checking the water supply, the remaining problem is drainage.

The location of the acceptance drainage is mainly in the basin, bathroom, bathtub, bathroom, kitchen, balcony floor drain and so on. You should hear a grunt, and there is no water on the surface. Qualified ground can't have water, because the floor drain is the lowest place, but there is a certain height of floor around the floor drain of the rough house. According to the water pressure and drainage speed, try to make the water flow big and fast. 10. Is the electricity the same as the quantity bought?

The first step of electrical inspection is to check whether the water and electricity quantity of electric card and water card is consistent with the purchase quantity;

1 1. Is the reserved hole reasonable?

First, check the air conditioning seats and holes in the living room, south and north bedrooms. When checking the air conditioning hole, be sure to look at the inside high and the outside low. If it is high outside and low inside, rain will flood in when it rains, which is a troublesome thing, especially when air conditioning holes are opened in the north, and irrigation is very serious. (Tips: If you find this problem, stick to plugging the original hole.

Punch again. ) 12. Strong current and weak current

See if switches and meters can control indoor lamps and sockets, and check the firmness of switches and sockets. Check whether the vertical distance between strong current and weak current exceeds one meter, otherwise it will affect the viewing effect of TV in the future. Use an electric pen/light bulb to measure whether each strong and weak current is unblocked.

Whether the indoor power supply is completely cut off after the switch is turned on, and if there is a switch in the room, check it separately. You can know whether the switch and the electric meter can completely control the indoor power supply. For sockets, they must be safety sockets (sockets more than 30 cm from the ground must be equipped with safety devices). The power socket in the bathroom should be a moisture-proof socket with splash-proof measures. The lighting socket in the bathroom must be a magnetic port safety socket, and there can be no socket above the washbasin.

13. Check the indoor flatness.

(1) Tie the heavy object to the roof with a string, stick it on the wall and put it down to the foot of the wall, and check its inclination from all sides.

(2) Visually, it is roughly flat.

(3) Check the flatness of the wall. Whether the walls and ceiling floors are particularly inclined, bent and corrugated.

14. Check the verticality of doors and windows.

(1) Whether the bolt and lock of the gate are too long or too tight.

(2) Are there too few door bolts? Whether the door gap is too large (especially on the side of the door lock).

(3) Are the four sides of the door close to the door frame? Is there any special sound when the door is opened and closed?

(4) Is there any water stain under the windowsill? If there is, it may be that the window is leaking.

(5) Whether there is a gap between the window and the concrete interface.

(6) Is the switch window too tight? Can you turn it off?

(7) Whether the window glass is in good condition.

15. Open * * *

(1) Open the line interface of the telephone and TV, and pull it hard to see if it is empty.

Second, the inspection process of the house

After receiving the notice of occupancy from the real estate agent, the owner can inspect the house according to the agreed date. When closing the house, first check whether the archives of the real estate agent meet the requirements, that is, whether there is a seal of the construction Committee agreeing to put on record on the completion record form, and then conduct on-the-spot acceptance of the house. In the process of house inspection, we should mainly pay attention to the following contents:

1, house inspection procedure

Check whether the house you live in is the one you bought. If it is inconsistent with the purchase contract, annex and supplementary agreement, it shall be submitted to the real estate agent in time for review and replacement;

2, determine the housing area

The area error should be proposed to the real estate agent according to the contract before moving in;

3. Look at the building structure

Check the quality of the house by yourself, and if structural problems are found, put forward to the real estate agent and report to the relevant departments of * * * *; If non-structural problems are found, a written record should be made truthfully when handing over to the real estate agent, and the real estate agent should be required to make a written commitment to carry out maintenance within a certain period of time;

4. Check the use of the house.

Check the equipment in the house according to the purchase contract, annexes and supplementary agreements, and check the completeness and use of water, electricity, gas and heat equipment. If there are any discrepancies or defects, ask the real estate agent to indicate them on the handover list at the time of handover, and ask the real estate agent to confirm the specific date of replacement and completion in writing;

5. Determine the property rights of the house.

Matters that cannot be determined in the House Delivery Verification Sheet or Delivery Sheet provided by the real estate agency shall be marked as "unknown" or "unknown" and signed or sealed by both parties.

(2) Whether telephone lines, closed-circuit television lines and broadband are in place.

(3) CCTV monitoring system, building visual intercom system and home security alarm system.

(4) Peripheral prevention management system, off-line intelligent patrol system, background sound and broadcasting system.

Tips: The above fifteen knowledge about house inspection will be explained to every owner when he closes the house. For the owners, house inspection should be a very important thing, because only when the problems of the house are found before signing the contract can the real responsible person be investigated and their own interests be guaranteed to the maximum extent.

The above 15 points for attention and five pieces of knowledge about the house inspection process were carefully arranged by me for the decoration owner, hoping to give the decoration owner a preliminary understanding of the acceptance of the new house. If you want to know more about it, keep following us.

Check its inclination from all angles. (2) Visually, it is roughly flat.

(3) Check the flatness of the wall. Whether the walls and ceiling floors are particularly inclined, bent and corrugated.

14. Check the verticality of doors and windows.

(1) Whether the bolt and lock of the gate are too long or too tight.

(2) Are there too few door bolts? Whether the door gap is too large (especially on the side of the door lock).

(3) Are the four sides of the door close to the door frame? Is there any special sound when the door is opened and closed?

(4) Is there any water stain under the windowsill? If there is, it may be that the window is leaking.

(5) Whether there is a gap between the window and the concrete interface.

(6) Is the switch window too tight? Can you turn it off?

(7) Whether the window glass is in good condition.

15. Open * * *

(1) Open the line interface of the telephone and TV, and pull it hard to see if it is empty.

Second, the inspection process of the house

After receiving the notice of occupancy from the real estate agent, the owner can inspect the house according to the agreed date. When closing the house, first check whether the archives of the real estate agent meet the requirements, that is, whether there is a seal of the construction Committee agreeing to put on record on the completion record form, and then conduct on-the-spot acceptance of the house. In the process of house inspection, we should mainly pay attention to the following contents:

1, house inspection procedure

Check whether the house you live in is the one you bought. If it is inconsistent with the purchase contract, annex and supplementary agreement, it shall be submitted to the real estate agent in time for review and replacement;

2, determine the housing area

The area error should be proposed to the real estate agent according to the contract before moving in;

3. Look at the building structure

Check the quality of the house by yourself, and if structural problems are found, put forward to the real estate agent and report to the relevant departments of * * * *; If non-structural problems are found, a written record should be made truthfully when handing over to the real estate agent, and the real estate agent should be required to make a written commitment to carry out maintenance within a certain period of time;

4. Check the use of the house.

Check the equipment in the house according to the purchase contract, annexes and supplementary agreements, and check the completeness and use of water, electricity, gas and heat equipment. If there are any discrepancies or defects, ask the real estate agent to indicate them on the handover list at the time of handover, and ask the real estate agent to confirm the specific date of replacement and completion in writing;

5. Determine the property rights of the house.

Matters that cannot be determined in the House Delivery Verification Sheet or Delivery Sheet provided by the real estate agency shall be marked as "unknown" or "unknown" and signed or sealed by both parties.

(2) Whether telephone lines, closed-circuit television lines and broadband are in place.

(3) CCTV monitoring system, building visual intercom system and home security alarm system.

(4) Peripheral prevention management system, off-line intelligent patrol system, background sound and broadcasting system.

Tips: The above fifteen knowledge about house inspection will be explained to every owner when he closes the house. For the owners, house inspection should be a very important thing, because only when the problems of the house are found before signing the contract can the real responsible person be investigated and their own interests be guaranteed to the maximum extent.

The above 15 points for attention and five pieces of knowledge about the house inspection process were carefully arranged by me for the decoration owner, hoping to give the decoration owner a preliminary understanding of the acceptance of the new house. If you want to know more about it, keep following us.