How far is emin county from Urumqi in Tacheng area?

Driving route: the whole journey is about 492.7 kilometers.

Starting point: emin county.

1. emin county internal drive scheme

1) Start from the starting point to the west, drive along X806 for 440 meters, turn left and enter S20 1.

2) Follow S20 1 drive 1.7km, turn right and enter S22 1.

3) Follow S22 1 for 2.9 kilometers and turn left.

4) Drive 5.5km, pass Aksu Village for about 280m, turn right ahead and enter S20 1.

5) Follow S20 1 drive 19.6km, cross Kurumushu Bridge for about 180m, and go straight into Kurumushu Bridge.

6) Drive 60 meters along Kurumushe Bridge and go straight into S20 1.

7) Follow S20 1 drive 12.7km and go straight into Aksu River Bridge.

2. Drive along Aksu River Bridge 130m and go straight to S20 1.

3. Drive 43.2km along S20 1 and go straight into Tiechanggou Second Bridge.

4. Drive along Tiechanggou Second Bridge 1 10 meters, and go straight into S20 1.

5. Follow S20 1 for 86. 1 km, and go straight into the West Ring Road.

6. Drive along the West Ring Road for 9.8km, turn right ahead and enter Yingbin Avenue.

7. Drive along Yingbin Avenue for 3.5 kilometers and turn left slightly in the direction of Hutubi.

8. Drive 990 meters and go straight into S20 1.

9. Drive along S20 1 for 6.2km, turn right slightly in Changji direction and enter S20 1.

10. Follow S20 1 for 96.6 kilometers, turn right slightly in Changji direction and enter S20 1.

1 1. Go along S20 110.9 km, and then turn right slightly.

12. Go ahead 60 meters and turn right.

13. Drive 1.4km and go straight into Wugongtai overpass.

14. Drive along Wugongtai overpass 190 meters, cross Wugongtai overpass and turn left into Wugongtai overpass.

15. Drive along Wugongtai overpass for 470 meters, at the entrance, enter G30.

16. Drive along G30 for 66.4 kilometers and go straight into Wu-Kui Expressway.

17. Drive along Wugui Expressway 1.6km, drive in the direction of International Airport/Midong District, turn right slightly and enter Wugui Expressway.

18. Urumqi driving plan

1) Drive along Wu-Kui Expressway for 3.0km, go to Diwobao International Airport, turn right slightly and enter Xiaodiwobao overpass.

2) Drive along Xiaodiwobao overpass for 790 meters and enter the airport expressway at the entrance.

3) Drive along the airport at a high speed of 8. 1km, enter the outer ring road at the entrance.

4) Drive along the outer ring road for 2 10 meters, exit Altay Road and enter the outer ring road.

5) Drive 40 meters along the outer ring road and go straight into G3 12.

6) Drive along G3 12 for 350 meters, cross Muchang overpass, turn left slightly towards Altay Road/Suzhou Road, and enter G3 12.

7) Drive along G3 12 for 4.5km, pass through Jiahe Complex Building of Guanghui Property Management Company on the left for about 2 10m, and turn left into Xinyi Road.

8) Drive along Xinyi Road for 3.0km, cross block B of Aosheng Building on the right, and turn right ahead into Nanhu North Road.

9) Drive along Nanhu North Road 1.4km and turn left.

10) Drive 10 meters and go straight into Nanhu East Road.

1 1) Drive along Nanhu East Road 1 10 meter. After passing the Xinjiang Talent Building on the left, turn right.

12) Drive 10 meter to the finish line (on the left side of the road).

End point: Urumqi mace is afraid of injury.