Does the power outage affect heating? What preparations should be made at the beginning of heating?

In winter, everyone is most concerned about heating. Because the weather is getting colder every day, many people begin to make various preparations for heating. In order to make people understand the problems encountered in the heating process, people should start with the most common situations, so that everyone can avoid all kinds of situations. In the early stage of heating, people must be prepared. So, do you want to analyze the impact of power outage on heating? What preparations should be made at the beginning of heating?

Does the power outage affect heating?

If there is a power failure, the circulating pump and make-up pump of the heat exchange station will automatically stop running, and the hot water in the heating system will stop circulating, so the hot water stranded in the heating will no longer be heated, and the temperature will gradually drop, so the power failure will affect the heating.

1. If the power is cut off for a short time, the water stored in the heating pipeline and the water tank of the heat exchange station can basically maintain the normal operation of the heating system, and has little influence on the heating in the user's home. However, if there is a long-term power outage or a short-term power outage, but users privately put hot water at home through various forms, the water loss is too large, which will affect the pressure and flow of the whole heating system, leading to water shortage or air plug in the heating system, thus affecting heating.

2. Therefore, water and electricity are the basic conditions to ensure the normal operation of household central heating, and the linkage of water and electricity can ensure the normal operation of equipment. In this company, it is also strongly requested that hot users in the water cut-off area are strictly forbidden to heat hot water through various forms of private houses at home, so as to avoid excessive water loss caused by water cut-off and heating failure, which will affect the normal life of the unit. At the same time, our company will also do a good job of water storage in the heat exchange station to avoid the shutdown of the station building due to short-term water stoppage.

What preparations should be made at the beginning of heating?

1. After heating starts, users can take some measures to raise the temperature.

Usually in the early stage of heating, it is often reflected that the heating is not hot. Because the whole system and room need a process of heat transfer and heat storage, the temperature is gradually rising. In the meantime, residents should try not to open doors and windows often.

2, radiator water seepage phenomenon measures.

In the process of heating, users should check the heating facilities in time and adopt different treatment methods according to different situations because of the phenomenon of thermal expansion and cold contraction. There are three kinds of water seepage: slight water seepage, water seepage and serious water seepage. For slight water seepage (about five drops per minute), users can use water receiving equipment to receive water. With the increase of water supply temperature, water seepage may decrease. More than ten drops are considered as water seepage, and can be observed for a period of time, about three to five days, depending on the actual situation. If the amount of water seepage decreases with the change of temperature, users can use water receiving equipment to receive water. If the water seepage is serious (more than ten drops per minute), you should contact relevant personnel for maintenance in time.

3, the water in the heating can't be put privately.

The reasons are as follows: first, the water in the heating is harmful to the body because of the addition of antiseptic chemicals. Second, there should be enough water in the heating pipeline to keep the hot water running normally. Once water is lost, it will lead to water shortage or air plug in the heating system, which will affect the heating effect. Third, a large amount of water loss in the heating pipeline will affect the pressure and flow of the whole system, and it is necessary to supplement a large amount of cold water, which will inevitably affect the heating temperature.

Does the power outage affect heating? What preparations should be made at the beginning of heating? The above content is the relevant answer that everyone especially wants to know. In the early stage of heating, everyone should do all the preparatory work. Power failure will have a certain impact on heating, in addition, people will encounter many situations. In short, people need to be prepared before and during heating, which will have a great impact.