How many centimeters is the toilet reserved opening from the wall?

How many centimeters is the toilet reserved opening from the wall?

How many centimeters is the toilet reserved from the wall? When building a house, toilet drainage holes will be reserved in advance. This is because the toilet is used frequently, so we must pay special attention to it when installing it. How many centimeters away from the wall is the reserved opening of the shared bathroom?

How many centimeters is the toilet reserved opening from the wall? 1 1. How many centimeters is the toilet reserve from the wall?

Generally 32 cm or 42 cm away from the wall. Because the size of the reserved hole away from the wall is equal to the size of the toilet drain hole plus the thickness of the wall brick, and the sizes of the common toilet drain holes in the market are 30 cm and 40 cm, and the thickness of the upper wall of the ceramic tile is about 2 cm. The size of the reserved hole and the wall surface should be consistent with the size of the toilet drain, taking 32 cm or 42 cm, while ensuring that it can be installed without occupying extra space.

Second, what should I pay attention to when installing the toilet?

1. Before installing the toilet, check whether there is gravel or other sundries in the sewer pipe. Because the gravel is heavy and easy to sink to the bottom, it is difficult to rush out when flushing. If you install the toilet directly, it will be very easy to block later.

2, the installation of toilet money also needs to check the flatness and cleanliness of the ground, requiring the ground to be flat and tidy. Because the toilet base is flat and perfectly attached to the ground, it can prevent the toilet from shaking and is more convenient to use. At the same time, it is sealed to avoid the backflow of sewage odor.

There are many specifications of toilets. Before installation, users need to measure the dimensions of the center point and the sewer pipe wall, and then buy a suitable toilet according to the dimensions, so as to ensure that the toilet can be installed and will not occupy extra space in the bathroom.

4. When installing the toilet, the sealing work must be in place, especially the joint between the toilet base and the ground, which needs to be coated with glass glue to prevent the odor in the sewer from returning indoors.

How many centimeters is the toilet reserved opening from the wall? How big is the toilet from the wall? How to choose a toilet?

1. There are many sizes of off-wall toilets, including 20 cm, 30 cm and 40 cm, but the commonly used size is 30 cm -40 cm.

2. In addition, there are two drainage modes in the bathroom: the lower row and the back row. Down-row type refers to the distance from the center of the ground sewer hole to the wall, which is generally 30 cm and 40 cm. The back row type refers to the distance from the center of the drainage hole to the finished ground, which is generally 20 cm.

How to choose a toilet?

1, water consumption

Toilets are closely related to water quantity. There are two main ways to save water resources. One is to save water, and the other is to reuse water resources through waste utilization. The function of water-saving toilet is the same as that of ordinary toilet. Saving water resources is very important. It can keep the toilet clean and transport excrement for us. When buying, you should know the displacement of toilet.

2. See if the glaze is even.

When shopping, you can let the merchants see if the sewage outlet is glazed. If possible, put it in the sewage outlet and feel if the toilet is glazed. A toilet will have dirt because the glaze is not good, and the qualified glaze gives people a delicate feeling. If you touch the corners of the glaze, if the glaze is thin, the corners will be uneven and feel rough.

3. Listen to the sound

When shopping, be sure to know whether the toilet is cracked and cooked. Generally, the water absorption rate of toilets made at high temperature is very low, which will not allow sewage to enter and is prone to odor. Mid-range toilets have a very high water absorption rate, which is easy to smell and difficult to clean. After a long time, cracks and water leakage will occur. To judge whether a toilet is complete, you can use your hands to hit the toilet. If the voice is hoarse and not loud enough, it is very likely that the toilet is among them.

How many centimeters is the toilet reserved opening from the wall? 3. How many centimeters is the toilet from the wall?

The distance between the toilet and the wall is not fixed. Generally, it is better to keep a distance of 40 cm between the side of the toilet and the wall, so that the toilet will not be too crowded. If the bathroom space is relatively small, the distance from the wall can be reduced, but try not to be less than 15cm. If it is a smart toilet, the toilet should keep a distance of 35cm from the wall.

Second, what should I do if the toilet is off the wall 10cm?

In this case, you can build a table behind the toilet and then put small items on it for decoration. Or directly customize a cabinet to put bathroom supplies and green plants behind the toilet.

Or just build a distance on the back wall and make a half-wall shelf. If it is convenient, you can directly remove the toilet by displacement and reinstall it.

Third, how to deal with the wrong pit spacing in the toilet?

1, using toilet shifter

Accurately measure the distance to be moved, then connect the main body and steering assembly with glue, then dig out the path to be moved on the ground and bury it in the shifter.

2. Knock down the back wall of the toilet.

If the pit distance is relatively small, knocking off the wall behind the toilet and burying it in the water tank to make an embedded toilet can also shorten the distance.

3. Re-impact the pit position

The original pit was demolished and repaired again, but it needed the consent of the neighbors and the downstairs property, because it needed to be modified on the top of their bathroom. This method is troublesome, but there is a hidden danger of water leakage.

Step 4 extend the drain pipe

If the distance is long, you can also raise the floor and lengthen the drain pipe. However, it should be noted that the drainage pipe has a certain slope, otherwise it will affect the use effect.

How many centimeters is the toilet reserved opening from the wall? What is the distance between the toilet and the wall?

Toilet pit distance refers to the distance from the center of toilet sewer pipe to the wall, which is generally 300mm, 350mm, 400mm, 450mm, 500mm, etc. Choosing the right toilet must first choose the right pit spacing.

1, the installation master said that there are actually many sizes of toilets away from the wall, such as 20 cm, 30 cm, 40 cm and so on. However, generally, the sizes of closets off the wall are mostly 30 cm and 40 cm, so when choosing closets, you need to pay attention to the size of the drain pipe off the wall of your own closets to prevent it from being installed after you buy it.

2. In addition, there are two drainage modes in the bathroom: the lower row and the back row. Lower drainage refers to the distance from the center of the ground drainage hole to the wall, which is 30.5 cm and 40 cm, and rear drainage refers to the distance from the center of the drainage hole to the finished ground, which is generally 20 cm. Different drainage methods make the bathroom drain pipe different from the wall.

3. After knowing the distance between the toilet sewer pipe and the wall, the installation master added that it is necessary to pay attention to the size and material of the toilet sewer pipe. At present, the materials of sewer pipes in home decoration bathrooms are mainly divided into pvc and cast iron. The diameter of toilet sewer pipe is 1 1 cm. Of course, in order to drain smoothly, the diameter of the toilet sewer pipe needs to be the same as that of the sewer pipe, so that the toilet can be installed correctly.

How to choose a toilet?

1. We need to measure the diameter of the toilet sewage outlet and the distance from the wall, so as to know fairly well. When choosing a toilet, choose one that suits the size of your own bathroom.

2. In the sanitary ware market, we should carefully observe the glaze water on the toilet surface. The quality of glaze water directly affects the use experience of toilet. Glazed water should be smooth, and the toilet with good water quality is not easy to scale, so it is more worry-free to use.

There are two kinds of toilets: straight flush and siphon, each with its own advantages and disadvantages. Direct flushing saves water, but it is also loud when flushing, sometimes it is not easy to flush, while siphon flushing is clean and silent, but it costs more water. You can choose according to your own needs.

4. In addition to observing the appearance of the toilet, the internal hardware materials are also very important, especially the flushing facilities. If you press it gently by hand, the quality is very good.