Should I look for a property if the house leaks?

Looking for a property, if it is because of public parts, such as balconies, roofs, walls, etc., resulting in water leakage in the building. Then find the property management company to be responsible. If the water leakage is caused by improper use of the owner's own parts, such as waterproofing and illegal transformation, the owner shall bear the responsibility. In addition, if there is a problem with the quality of the house, you can claim compensation from the developer.

What are the maintenance tips for leaking houses?

1. When dealing with building leakage, we can reset the waterproof layer suitable for exposure in this area. If the waterproofing material is the selected waterproofing membrane, it is recommended to adopt the national standard 3mm polyester tire aluminum film SBS, and seal the lap joint of the membrane, so that no leakage will occur in any gap.

2. To deal with building leakage, additional reinforcement can be carried out for roof pipes, water heater roots, yin and yang angles, etc.

No matter what the cause of water leakage in the building is, we must repair it. First, we must find the location of the water leak. If there are cracks, cut the cement sand into a V-shape, then brush the waterproof material, and then brush a layer of cement sand, but the area is large and the thickness is high. There is also a groove on the edge of the cement sand, which can be stuck more firmly.

4. If the water pipe leaks, there may be a problem with the installation process or the material of the water pipe. You need to check it carefully to see what the problem is.

5. We can't find the leakage point of the building, so it's suggested to use waterproof slurry to make it waterproof again. Can be painted many times, can be fortified many times. Complete waterproof layer should be brushed twice, with a total thickness of less than 2mm, and then the cement mortar protective layer should be brushed. After the protective layer is dried, conduct comprehensive waterproof coating, and then use cement mortar as the protective layer. Then brush flexible waterproof cement slurry. This can be repeated 3-4 times to bring better waterproof effect. But the base surface must be handled well, and cement mortar must be used as a protective layer outside.