What should I do if the noise in the community is too loud?

1, noise treatment of external residence

For the treatment of external noise of residential buildings, Bian Xiao thinks that in the initial process of residential design and planning, the acoustic environment of residential buildings should be fully considered to make the acoustic environment of residential buildings in the best possible state. At the same time, the design and planning should be carried out, and the changes of the future weekly measurement environment should be fully considered, so as to reduce the cost of subsequent noise control and treatment with reasonable design layout and avoid the economic losses caused by house depreciation and noise.

In the planning and layout of residential areas, not only in the process of design and planning, public activity areas should be set near secondary roads as far as possible, but not in the middle of residential areas, which can not only reduce the impact of life noise caused by the concentration of people in public spaces, but also have a certain inefficient buffer effect on noise sources inside and outside residential areas, thus directly protecting the internal acoustic environment of residential areas.

In addition, the greening inside the community is also a necessary means to avoid the influence of external noise. Scientific planting of trees and other vegetation can reduce noise reflection and absorb noise in residential areas. In this category, anti-noise greening can be implemented in combination with sound barriers.

2. Countermeasures and suggestions to reduce the internal noise of residential quarters.

Compared with the solution of external noise, it is more complicated and difficult to reduce the influence of internal noise in residential quarters, because most noise sources are located inside the house.

For example: elevator noise on the top floor of the community, pump room noise in the community, vibration noise of sewage pipes in the community, etc. By agreeing to arrange and plan the noise equipment in residential buildings, sound insulation and noise reduction measures are taken to reduce the selection of high-noise equipment and noise pollution.

In view of the treatment of water pipe vibration and noise and their interaction in residential quarters, the author thinks that low-noise spiral water pipes should be selected, which can effectively reduce the pipe vibration and noise interference in upper and lower floors and adjacent rooms.

In order to deal with the operation noise of building equipment, the equipment with relatively low motor noise should be selected as far as possible in the selection of elevators, air conditioners and pumps.

In order to control the noise source, the corresponding computer rooms should be set underground as far as possible, the walls between the computer rooms should be sound-insulated, and supporting vibration reduction bases should be set for building equipment with large vibration such as upper and lower pumps. If conditions permit, it is best to make the equipment in the room flexible.