How to set the password for community access control

Question 1: How to modify the community access control password? Press #, enter the system password 12345 or 123456, press 1 after input, and then enter 5 digits to modify the system password.

Press 60+# to enter an 8-digit card number+# to delete a card.

If this method doesn't work, please ask the property manager for help.

Question 2: The opening password of the community access control system can be set at any time, just like the bank card password, it can be changed at any time. General password access control can be set to three ways: swipe the card to open the door or password to open the door or card+password to open the door.

Access control refers to the forbidden authority of the "door" and is the prevention of the "door". Access control password is a digital password set for opening access control, which provides convenience for the host.

The entrance and exit safety management system of residential quarters is a new modern safety management system integrating microcomputer automatic identification technology and modern safety management measures. It is an effective measure to solve the safety management of entrances and exits of important departments.

Common access control systems include password access control system, contactless card access control system and fingerprint iris palm biometric access control system.

Ask the property directly, or see which company the access control belongs to and which company asks for the password (no need to change the password).

Question 3: How to set the password for access control and door opening? 1.mg236b sets the password method for opening the door.

First, you must know the programming password; Becoming a password is not the same as opening a door. Be sure to distinguish clearly.

The factory programming password of mg236b access control is 990 10 1, which is generally modified after the access control system is installed and debugged.

This is the manual of mg236. You can keep it for next time.

Now take the original programming password 990 10 1 as an example.

2. Programming password: 990 10 1

Door opening mode card or universal password;

Default password: 1234

The unlocking time is 3 seconds.

Tamper alarm off

Door magnetic alarm closed

The magnetic state of the unlock detection door is closed.

The alarm delay is 0 seconds.

3. Acousto-optic display

3. 1. Under the normal working state of the controller:

3. 1. 1. Effective instruction: beep.

3. 1.2. Invalid command: long beep.

3.2. In the programming state:

3.2. 1. The green light is always on.

3.2.2. Effective command: beep twice.

3.2.3. Invalid command: beep three times.

4. Undo the unfinished instructions:

Before the instruction is completely completed, press the [*] key to cancel the input instruction.

5. Functions and settings:

5. 1. Enter the programming:

[~]+[6-digit programming password]

Default: 990 10 1. Users are advised to modify this password.

5.2. Modify the programming password:

[0]

+[Enter a 6-digit new programming password]

+[Enter the new 6-digit programming password repeatedly]

5.3. Set a valid card:

5.3. 1. Set a valid card for the induction mode:

[5]

+[sensor card 1]

+[Proximity Card 2]

+……

+[inductive card n]

+[*] End card addition

5.3.2. Set a valid card according to the card number:

[5]

+[Enter 8-digit card number 1]

+[Enter 8-digit card number 2]

+……

+[Enter 8-digit card number n]

+[*] End card addition

The same weigand26 card generally has two card numbers.

For example, if a card code is 00 16497924 code 2 25 1 48388, the last 8 digits of the code 1 are selected, that is, "16497924" is selected as the added card number.

5.3.3. Add a group of continuous card numbers:

[9]

+[Enter 8-digit starting card number]

+[Enter 8-digit termination card number]

When adding a continuous card number, the first four digits of the 8-digit card number must be the same before using this method. For example:12510000-12519999 can be increased continuously, but12500000-19999.

5.4. Delete the valid card:

5.4. 1. Delete the valid card by inductive card method:

[7]

+[sensor card 1]

+[Proximity Card 2]

+……

+[inductive card n]

+[*]

5.4.2. Delete valid cards by card number:

[7]

+[Enter 8-digit card number 1]

+[Enter 8-digit card number 2]

+……

+[Enter 8-digit card number n]

+[*]

5.4.3. Delete all the set cards:

Please use the method of restoring factory settings.

5.5. Modify common passwords:

[3]+[4-digit new universal password], the original password is invalid.

When the password is 0000, all passwords are invalid. At this time, the function of "Card+Password" cannot be used.

5.6. Exit the programming state:

[~] DuDu

5.7. Set the door opening mode:

5.7. 1. card or universal password: [1]+[0]

5.7.2. Card plus general password: [1]+[ 1]

5.8. Set the opening hours:

[2]+[TT].TT indicates the opening time in seconds, and TT=03 if the unlocking time is 3 seconds.

5.9. Set anti-disassembly alarm function:

5.9. 1. Turn off the tamper alarm: [4]+[0]

5.9.2. Turn on the tamper alarm: [4]+[ 1]

5.......& gt& gt

Question 4: How to set GAMBOR access control password GAMBOR access control has administrator password, programming password and user password.

Programming password for security, of course, only administrators and manufacturers master.

Modify the user's password (if you forget it)

-Must be an administrator operation.

-Press * to set the password #

-Press 5 New Password # New Password # *

Question 5: How to set the office access password, rush, online, etc. The modification of the access password needs to be determined according to the programming password and setting steps of the access controller. Many access control machines are set up in different ways. This is also for security reasons. Providing detailed information may provide a setting method, but you need to consider the risk of password leakage or being seen by people with ulterior motives.

Question 6: How to change the access control password of residential units is generally set by the administrator password. You cannot change the administrator password unless you know it. Xi animation Taobao access control, satisfied through, thank you! !

Question 7: Password setting of access control system 5 points All-pass access control machine tip: Set/modify the universal door opening password:

Press [3]+[4-digit new password], and the original 4-digit password will be overwritten by the buzzer;

Press [3]+[0000] and beep twice to clear all "common passwords";

Question 8: What is the initial password for community access control? That's the way to open the door with a password. Try more:1234,5555,8888,9999. ..........

Question 9: After entering the community access control password, what key can I press to open the door? After entering the community access password, press the # key. Only used for community access control, exchange and access control.

There is a # key on the intercom access control of the community, which is the confirmation key. Press the password and press the # key to open the door. Only when the password is correct can the door be opened.

The confirmation key on the access control machine is sometimes different from the confirmation key on the mobile phone intercom. Please pay attention to the difference.

Question 10: How to change the access password of residential units? The M 1 card is divided into 16 sectors, and each sector consists of 4 blocks (block 0, block 1, block 2 and block 3). The 64 blocks of the 16 sector are numbered as 0-63 according to their absolute addresses, and the block 0 of the 0th sector (i.e. the absolute address 0 block) is used for storing vendors. Block 0, block 1 and block 2 of each sector are data blocks, which can be used to store data. Data blocks can be used for general data storage, reading and writing operations, data value taking, initialization, addition, subtraction and reading operations. Block 3 of the sector is the control block, including password A, storage control and password B. The password storage control of each sector is independent, and the grid password and access control can be set according to actual needs.

-Xin 'an Card-