Waterproof construction steps and construction precautions in the later stage of toilet

Because the bathroom is used as a shower, it has the best waterproof effect, especially the joint between the wall and the ground and the joint between water and water pipes, which is the easiest to leak water. Waterproof paint must be applied in proper position. ?

I. Waterproof construction steps in the later stage of the toilet 1. Use slightly thicker cement as primer first, and then apply waterproof coating when the cement is dry. But when you spend money, the land should be flat and there should be no grooves. Then sprinkle water on the ground to discharge gas from the small holes.

2. Waterproof, and the powder and liquid are mixed evenly in the later stage of the toilet. If there are bubbles when painting, please clean them up.

3. When the toilet is waterproof later, brush it in the same direction, wait 1-2 hours, and then wipe the second layer. When wiping the second layer, the direction of the brush should be opposite to that of the first layer.

4. The toilet is waterproof in the later stage. You can draw more times, increase the density and fill in the blanks. Some people think that the more waterproof coatings, the better, even 6 to 7 layers. In fact, this is not good. The coating is too thick and easy to crack.

5. Conduct waterproof test.

6. In the later bathroom waterproof test, first meet your neighbor downstairs, drain the ground, fill it up, wait for an hour, and then ask your neighbor for water. If there is leakage, please reinstall the waterproof layer. If you are doing a water resistance test, you can stick tiles.

2. Precautions for waterproof construction in the later stage of toilet 1. Before waterproof construction, the dust on the surface should be cleaned up first, otherwise it will affect the adhesion of the paint. Good handling of cars and walls ensures more than one step, including but not limited to stripping powder in the dark.

2. Circular arc (or V-shape), and then converted into the priority remaining hollow part. The two corners 2 wipe clean the dust on the floor, loosely agglomerate and remove the matrix layer. The first cement mortar should be seamlessly grounded and waterproof. This makes it possible to prevent the waterproof coating from leaking due to uneven thickness.

Because the bathroom is where we deal with water and all kinds of pipes. Care must be taken to ensure that the connection between the pipeline and the ground is defective. Typical bathroom wall leaks because waterproof materials are not evenly applied between pipes and walls.

The waterproof paint on the wall should be painted higher. Otherwise, water will penetrate into the wall and damage it easily. If the bathroom surface is a light wall, then the whole wall must be coated with waterproof paint.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~