What to prepare in the preparation stage of measuring room, the steps of measuring room and the problems needing attention

As we all know, measuring a house is a step of decoration. Only when the size of each room is good can the next decoration design be carried out and the decoration quotation scheme be given. The measuring room should be prepared with tools such as tape measure, infrared range finder and pen, and the floor plan of the house should also be prepared. Only by figuring out the steps of measuring the room and the problems that need attention can we easily solve the decoration problem! What should be prepared in the preparation stage of measuring the house, the steps of measuring the house and the problems that need attention? Come and find out!

First, what to prepare for the preparatory stage of housing survey?

1. Prepare the floor plan of the house.

When measuring the house, take the original floor plan of the house and mark the measurement data on the floor plan. If you don't have a plan, you can also draw a rough plane on paper and record the positions and left and right connections of different spaces.

2. Prepare measuring tools.

Bring at least 2 pens of different colors to distinguish and mark when drawing, as well as tape measure, drawing board and paper. When measuring floor height and space depth, laser rangefinders are also used, and mobile phones or cameras should also be brought. After the survey, we should take photos of each space and key areas, so that we can have an intuitive reference for the space scene when making subsequent planning.

Second, the steps of measuring the house and the problems needing attention

1. Measure the space from the entrance door, measure all the space of the house in a certain order, and record the data in the corresponding drawing position. If it is a multi-storey space, you can measure one layer first and then the other.

2. Measure the length of the room near the ground and the height near the corner with a tape measure.

3, first measure the height of the doors and windows themselves, and then measure the left and right spacing between the doors and windows and the connected wall, and the spacing between the doors and windows and the ceiling. Special attention should also be paid to the size and fixed position of the ceiling beam in each room.

4. Measure the size between the strong and weak current boxes, and then measure the height from the ground and the height from the side wall.

5. Check the position of doors, windows, switches and sockets on the wall and simply mark them on paper.

6. In the measurement of the kitchen, the relevant positions of the upper and lower water pipes, gas pipes, oil fume pipes and floor drains. It should be positioned. If you need to change the location of the gas meter, you need to apply to the property for filing as soon as possible. Bathroom should do a good job in measuring pit spacing, distance from the wall, distance under the pipe and the position of floor drain in the bathroom.

7. When measuring a house, you can also distinguish which walls are load-bearing and which are non-load-bearing according to the standard of the floor plan; And check the material of the wall, check whether the cement wall is cracked, or whether the balcony wall is bricked, whether the wall is vertical and whether the wall is cracked.

8. After all the measurements, a comprehensive inspection is needed to ensure the accuracy of the obtained data.

The above is Bian Xiao's knowledge about the preparation stage, the steps and the problems that should be paid attention to. I hope it helps you. If you want to know more information about house testing, please continue to pay attention.