Which is more suitable, reverse osmosis water treatment or ion exchange water treatment?

I'll give you the specifications of two devices.

15T/H reverse osmosis pure water machine

5T/H automatic reverse osmosis pure water machine ◇ Water production: 15T/H ◇ Power consumption: 15KW/H ◇ Water utilization: 75% ◇ Main engine floor space: 5200 *1200 */kloc-. . On-line flow, pressure and conductivity indication, beautiful and elegant, easy to operate. The high-pressure pump can be equipped with one for use and one for standby. Reverse osmosis is to let the solvent (usually water) in the solution pass through the reverse osmosis membrane (a semi-permeable membrane) with sufficient pressure, which is opposite to the direction of osmosis. The reverse osmosis method with osmotic pressure greater than that can be used to separate, purify and concentrate the solution. The main separation object of reverse osmosis membrane is the ion range in solution. The separation process of reverse osmosis has the following advantages: ① no heating, no phase change; ② Less energy consumption; ③ Small equipment size, simple operation and strong adaptability; ④ No pollution to the environment. Reverse osmosis pure water system adopts different processes according to different source water quality. Generally, the conductivity of tap water is less than 10μ s/cm after being treated by the primary reverse osmosis system, and less than 5 μ s/cm or even lower after being treated by the secondary reverse osmosis system. After the reverse osmosis system, ultra-pure water can be prepared by ion exchange equipment or EDI equipment, so that the resistivity can reach 18mω25℃ (about 0.056μS/cm). The core of reverse osmosis pure water system is reverse osmosis membrane, which is also the key to determine the quality of water production, but the quality of pretreatment process of reverse osmosis system (also known as pretreatment system) is the key to determine the stable operation of reverse osmosis system. Reverse osmosis equipment is widely used in cleaning water for electronic components such as integrated circuits, silicon wafers and display tubes. Infusion, injection, tablets, biochemical products and equipment cleaning in pharmaceutical industry. Chemical process water, chemical circulating water, chemical product manufacturing, etc. Power industry boiler make-up water, thermal power generation boilers, power systems of low-pressure boilers in factories and mines, seawater such as drinking pure water, beverages, beer, liquor, health care products, islands with desalinated brackish water, ships, offshore drilling platforms, drinking pure water vehicles in brackish water areas, communities, enterprises and institutions, home appliance painting, coated glass, cosmetics, fine chemicals, etc.

15T/H automatic ion exchange water purifier

Parameters: (pneumatic diaphragm valve +PLC control) ◇ Water production: 15T/H ◇ Electricity consumption: 3KW/H ◇ Resin quantity: 800L ◇ Host floor space: 7000* 1000*3200 ◇. Salts contained in raw water, such as calcium, magnesium and sodium salts, such as Ca(HCO3)2 and MgSO4, flow through the exchange resin layer, and cations such as Ca2+ and Mg2+ are replaced by active groups of cationic resins, while anions such as HCO3- and SO42- are replaced by active groups of anionic resins, so water is purified. If the content of bicarbonate in raw water is high, a degassing tower should be set between anion and cation exchange columns to remove CO2 gas and reduce the load of anion bed.

Dongguan Jiadi Water Treatment Co., Ltd. is a good company, and the price is much lower when the quality is comparable to others. You can go to their website to see www.jdscl.com's telephone number 13066 120304.