How to install the rear trailer cover of forest?

Put the trailer hitch behind the tractor and in front of the towed vehicle. Most car hooks are designed under the front and rear bumpers. Some car trailers are split and need to be assembled when they are used. After the cover on the bumper is removed, the hook can be found in the vehicle tool.

Installation of forest Trailer Rear Cover

When installing trailer tools, both tow rope and trailer rod must be firmly and reliably connected to the coupler. The towing hook is designed with a safety lock and needs to be locked in place. Flexible towing cable without towing hook at both ends should be tied with slipknot when used. If the knot is pulled by huge traction, it is difficult to untie the tow rope.

When the trunk is opened, the trailer hook is usually placed in a plastic box, and the tools are placed under the spare tire, usually together with the jack. After taking it out, you can find the installation position of the trailer hook. There is a small square module between the front bumper headlight and the front bumper, which is where the trailer hook is installed. Gently pry the small square module with a screwdriver and pry out the cover of the small module. Screw the trailer hook onto the small module, pay attention to the clockwise direction, and install it successfully until it can't be screwed.