What functions can the intelligent fire protection system of the Internet of Things achieve?

The main functions of the intelligent fire protection system of the Internet of Things are:

1, intelligent electrical fire monitoring system

It can realize the functions of leakage monitoring, temperature monitoring, current monitoring, voltage monitoring, electrical alarm information, APP push and so on.

The intelligent on-line monitoring system of electrical fire can send the fault alarm information of the lower sensor of this machine to the electrical fire monitoring equipment through the power bus communication network, and complete the comprehensive processing of monitoring and alarm. The detector has the characteristics of sensor fault diagnosis, high alarm accuracy, strong reliability (which can effectively prevent false alarm and false alarm), miniaturization, multifunction, simplicity and practicality, and convenient installation.

2. Intelligent smoke detection function:

Can realize smoke monitoring, fault alarm, APP push smoke alarm information, select the appropriate location. It is recommended to install it on the ceiling in the center of the detection space.

Intelligent smoke detector, also known as independent fire detection alarm of Internet of Things, is an intelligent smoke detector based on Internet of Things technology, which can sense fire information at the first time and immediately transmit it to owners, property management, safety supervision, fire control and other departments in a large range, so as to prevent problems before they happen and effectively protect the safety of life and property.

3. Intelligent combustible gas detector

Combustible gas detection, fault alarm and gas alarm information APP push

When detecting gases heavier than air; Installed 0.3-1.0m above the ground; Within the radius of air source 1.5m;

When detecting gas lighter than air: it shall be installed under the ceiling within 0.3- 1.0m and within the radius of 1.25m from the gas source.

Intelligent combustible gas detector is a high-stability indoor combustible gas detector introduced by Zhengzhou Jintola Company, which is used to detect combustible gas leakage and prevent the harm caused by gas leakage. When the detector detects the leakage of combustible gas and reaches the alarm concentration set by the detector, the red LED of the detector flashes and gives an alarm sound. At the same time, the alarm signal of the alarm will be wirelessly reported to the remote monitoring platform through the wireless base using the NB-IoT network, so that the monitoring personnel can handle it in time.

4, intelligent fire water source monitoring function:

Intelligent fire water level detector: monitor and display the water level of fire water source; Water level alarm information APP push

Intelligent fire hydrant water pressure detector: fire water pressure monitoring and display; Pressure alarm information APP push

Water pressure and water level perception: collect the hydraulic analog quantities of key parts such as fire hydrants and spray terminals in the fire water transmission system, and find out the abnormal water pressure and equipment failure in time. Remote real-time monitoring of water level of fire pool and high-level water tank through water level gauge.

Abnormal water pressure and water level alarm:? When the water pressure and water level are too low or too high, the device will automatically push the real-time water pressure and water level abnormal alarm, so that the owner unit and the maintenance department can respond in time.

Alarm acceptance:? The monitoring center provides 24-hour alarm acceptance service, immediately notifies water personnel and personnel of networking units, and promptly investigates hidden dangers of fire water sources.

APP push:? The monitoring center provides intelligent fire-fighting APP information service, and pushes fault information at the first time to remind water personnel and networked unit personnel to deal with fire-fighting water source faults in time.

Data analysis:? Intelligent fire APP can provide information such as statistical inquiry reports for fire departments, owners and maintenance units.

5, fire alarm function:

Wireless manual fire alarm: wireless ad hoc network technology, fire alarm information APP push.

Wireless fire acousto-optic alarm: the wireless transmission distance can reach more than 500 meters, and the fire alarm information is pushed through APP.

Fire failure notice:? Through the monitoring and automatic inspection of front-end fire detection and sensing equipment, fires and facility failures can be found in time.

Fire alarm and fault alarm:? When a fire alarm or fault alarm occurs, the fire detector will give an alarm by itself, the fire control host will give an alarm twice, and the cloud platform APP will push the alarm three times.

Alarm acceptance:? The monitoring center provides 24-hour alarm acceptance service, and notifies the owner, fire department and maintenance company to respond and handle it by phone, SMS or mobile APP at the first time.

Data analysis:? The cloud platform uses big data analysis technology to realize the intuitive display of fire analysis charts, the mining of fire failure essence and the accurate judgment of fire development trend.

6. Intelligent wireless video surveillance:

According to the video content analysis function of, users can preset different alarm rules in different camera scenes. Once the target violates the predefined rules in the scene, the system will automatically give an alarm, and the monitoring workstation will automatically pop up an alarm message and give an alarm sound. Users can click the alarm information to realize the scene reorganization of the alarm and take relevant measures.

7, fire control facilities inspection function:

With the help of the Internet of Things, the identification of key fire-fighting safety parts and fire-fighting facilities is established, and the reasonable fire-fighting inspection is carried out by scanning the labels with mobile phones. The household registration, standardization and trace management of fire-fighting inspection and daily fire-fighting safety management are realized through the inspection standards and methods of various fire-fighting facilities and key parts automatically prompted by the system. It can effectively promote the visual inspection of the personnel on duty, record the inspection contents, and provide a strong data base for future data statistics. The cloud platform automatically records the inspectors' inspection marks and uploads the data. The system stores, analyzes and manages data, and the fire safety service platform manages visual data analysis, evaluation, notification and rectification. Units shall, through fire safety inspection, check the implementation and compliance of their own fire safety systems and safe operating procedures, and supervise the implementation of rules, regulations and measures.