The split-level balcony needs to be sealed in this way to standardize safety. Is your home decorated wrong?

The so-called split-level balcony, the more common form is the odd-numbered balcony in the living room and the even-numbered balcony in the bedroom. This is a policy formulated by the state in the past to avoid the lighting problem caused by the dense spacing between buildings, but now many households find that there are many problems with this split-level balcony. As long as it is closed or covered by a sunshade, it may be considered illegal construction. How to seal correctly?

The first thing you need to do is to get the consent of the property and the neighbors upstairs. Because the property must ensure the overall appearance of the building and cannot be built at will. Upstairs neighbors mainly consider its anti-theft and roof reflection.

If you can make a canopy or security window, you need to consider the canopy height and bearing capacity first. If the height is not higher than the story height and the depth is not greater than the balcony, it can be solved by making a slope canopy and reducing the height of the canopy.

If you want to do it, you have to consider the bearing capacity of the balcony. After all, it will be windy and rainy when exposed to the outside. The material you choose should be thicker and stronger. In addition, you can also consider making a retractable temporary movable canopy, such as a steel frame cloth shed and a ceiling. As long as the height does not exceed, the property and neighbors have nothing to say.

Provide a more standardized and durable roof installation method;

Check the skeleton first. It must be flat and completely dry, so it is not suitable for making awnings in rainy days. Then, wrap both sides of the skeleton with waterproof tape to make it look like a small sink.

Put the sun board and other materials on the skeleton, compact the joints with layering, and then fix them with screws.

Don't install the sun panel directly against the wall, fix the angle aluminum on it first, and then install the sun panel.

Finally, seal the closed position of the sun visor with aluminum foil tape, and then fix it with edge banding.