How to clean the dirty tiles on the wall?

How to clean the dirty tiles on the wall?

How to clean the dirty tiles on the wall and how to clean the tiles in daily life is a great knowledge. More and more people even choose to lay tiles on the wall, but the cleanliness of tiles is also a big problem. So, how to clean the dirty tiles on the wall?

How to clean the dirty tiles on the wall 1 coup 1

Insist on cleaning tiles every day.

First of all, the most basic thing is to do a good job of daily cleaning. Correct daily cleaning of tiles is a good way to maintain tiles, and it can also prolong the service life of tiles.

Coup 2

Toilet paper degreasing

The tiles in the kitchen get greasy easily. At this time, we can stick toilet paper on the tile, spray a little detergent on the toilet paper, so that the grease will automatically get on it, then tear off the toilet paper and wipe it with a clean rag.

Coup 3

Vitamin C can remove rust spots on tiles.

In kitchens and bathrooms, where there is frequent contact with water, tiles are prone to yellow rust or scale. At this time, we can grind a few vitamin C tablets into powder and sprinkle them on the rust spots, and then rinse them with water several times.

Coup 4

Toothpaste can repair minor scratches.

Tiles can be cleaned when they are dirty. What if there is a slight scratch? Toothpaste can be used at this time. Apply toothpaste directly to the scratch and wipe it with a soft dry cloth to repair it.

Coup v

Candles can clean cracks in tiles.

Paint candles on the joints of ceramic tiles, because the candle surface is smooth, which can clean up the oil stains in the cracks. When cleaning the oil stains at the joints in the future, just scrub them normally with a general cleaner.

Coup 6

Exterior wall tile cleaning

Exterior wall tiles are more susceptible to dust, paint and other dirt. According to different dirt, there are different ways to clean tiles. When there is cement in the external wall brick, you can directly remove it or use a professional concrete cleaner.

Tips:

When purchasing ceramic tiles, the decontamination ability of ceramic tiles should be considered, and it is best to choose ceramic tiles with strong antifouling ability.

In addition, when cleaning tiles, be careful not to damage the glaze of the tiles. When cleaning, use more water, try not to clean the tiles with sharp objects, and pay attention to dry the water after cleaning.

How to clean the dirty tiles on the wall? 2 What is the cleanest cleaning method for ceramic tiles?

Ceramic tile liquid cleaner. It can quickly and thoroughly remove stubborn dirt and cracks on the surface of various tiles. Unique penetration and polishing brightness factor can quickly remove lime scale, electric welding, aluminum scratch, metal scratch, black scale, mold scale, cement scale, caulking agent scale, water rust, scale, various paints, various adhesives, various heavy oil stains, etc.

Therefore, when choosing ceramic tile cleaner, we must choose neutral formula products, so as to maintain the beauty, smoothness and luster of ceramic tile surface for a long time. Strong cleaner, can be used for tiles and wooden floors. The new formula does not contain oxalic acid, formaldehyde, phosphorus, aluminum and other substances, and does not damage the porcelain glaze on the surface of ceramic tiles.

Before I was taken by my friend Amway, I always thought that the special cleaning products for ceramic tiles were tasteless, but I found out the secret after using them once.

Although it is called Jieci Bao, this product can not only clean tiles and gaps, but also clean shower glass doors, nozzle scales and mirrors that are too expensive for your mother to recognize.

Spray directly, without dilution, and shine as new after rubbing.

What do you use to polish the tiles bright and clean?

1. Some simple stains, such as ordinary dust and dirt, will get on the tiles in daily life, just use soap and detergent. Add some ammonia and turpentine to mix with soap to make the tiles more shiny.

2. If there are scratches on the brick surface that are difficult to clean, spray a little detergent and gently wipe it with toothpaste for two minutes.

3. The gap between bricks is the most difficult to clean. You can maintain it with tile cleaner from time to time, and brush a layer of waterproof agent at the gap to prevent mildew.

The tiles in the bathroom and kitchen are the last to be cleaned. After a period of time, the tiles in the bathroom often appear ugly colors. How to clean them seems to be wrong. When we clean tiles, we should use soapy water and a little mixture of ammonia and turpentine to make tiles more shiny. I believe that after cleaning, the bathroom must be as good as new.

If the floor darkens after using wax cleaner, you can mix household ammonia and water one by one. Under the condition of good indoor ventilation, apply the solution to a small part of the ground with a mop, let it stand for 10 minute, then brush off the wax cleaner with a soft brush, and then rinse the area with clear water until the ground is bright again.