How to get to Qingshui Bay Bridge from Zhaojiayang, Tang Hong?

Driving route: the whole journey is about 59.4 kilometers.

Starting point: Tang Hong.

1. Start from the starting point to the northwest, follow the pressure line for 580 meters, pass the left rear trough head for about 240 meters, and then turn right into the saddle front.

2. Drive along the saddle front line 1.2km, and turn right into Luoguan Line.

3. Drive 530 meters along Luoguan Line and go straight into Rongji West Road.

4. Drive along Rongji West Road for 540 meters, and turn left on the ramp.

5. Drive along the ramp for 630 meters, cross the Guobaomiao Interchange for about 390 meters, and then go straight into the ring expressway.

6. Drive along Ningbo Ring Expressway for 6.9 kilometers, cross Qianyang Separation Interchange, head for Ningbo North/Jiangbei/Jiaxing /G 15, turn right slightly, and enter Ningbo North Hub.

7. Drive 630 meters along Ningbo North Hub, pass through Ningbo North Hub for about 990 meters, and go straight into the south connection of Hangzhou Bay Bridge.

8. Drive along the south connecting line of Hangzhou Bay Bridge for 26.5km, turn right slightly at Guanhaiwei/Attached Sea Exit and enter Guanhaiwei Interchange.

9. Go along Guanhaiwei Interchange 1.5km and turn right slightly.

10. Drive for 20 meters, turn right ahead and enter the middle intersection.

1 1. Follow the mid-span line 17.7km and enter Suntang North Road.

12. Drive along Suntang North Road for 3 10 meters and turn right into Renhe Road.

13. Drive along Renhe Road 1 10 meters straight.

14. Drive 200 meters to the finish line (on the left side of the road).

End point: Qingshuiwan Bridge