Methods of Waxing and Polishing Stone Matters needing attention in Waxing and Polishing Stone

There are many stone materials suitable for decoration now. In order to ensure the gloss of the stone materials after decoration, it is necessary to wax them. Many people don't know what to do because they haven't experienced such construction, so do you know the method of waxing and polishing stone? Let's take a look at the methods of stone waxing and polishing and the matters needing attention in stone waxing and polishing.

What is the method of waxing and polishing stone?

1, rough grinding. Use 50#, 150#, 300# and 500# diamond resin hard grinding blocks, and do not use soft water for rough grinding, otherwise waves will easily appear. The water supply for rough grinding is slightly larger, but remember not to be too much. After each grinding plate is ground, it should absorb water completely. Check whether the deep grooves and shallow grooves left by cutting abrasive are ground with 50# grinding disc, and so on. The machine follows the well-shaped grinding, and the rough grinding accounts for 45% of the total grinding time, which is the key link.

2. Fine grinding accounts for 35% of the total grinding time. Use 800#, 1000# and 2000# diamond resin soft water grinding discs. The first light appears after fine grinding to 800#, and the gloss can reach 50 degrees after fine grinding to 2000#.

3. The grinding time is 20%, and 3000# diamond resin soft water grinding sheet is sprayed with A2 for grinding and ion exchange. After polishing, the gloss is greatly improved, and the surface density of marble is improved, which lays the foundation for polishing.

4. Use animal hair pads, 3M pads, nano pads, matching marble mirror brightening paste NO2 and 2X mirror brightening knife with power over 2HP, rotating speed 175-2 10rpm, weight 45-70kg and animal hair content of 70% to polish. After polishing, the surface gloss of marble can reach at least Q5. Before waxing and polishing stone, impurities and obstacles on the marble surface should be removed, and the marble surface that needs waxing and polishing should be cleaned up. You can clean the floor with the help of multifunctional floor washer, Shi Shui washer and other cleaning supplies and tools, and it is best to dry the excess water on the floor with a dry rag.

Matters needing attention in stone waxing and polishing

1. Waxing for a long time is easy to cause the stone surface to yellow. After waxing, the pores of the stone are closed, and the water of the stone cannot be distributed, which leads to the long-term illness of the stone. Therefore, when using wax water to polish and maintain stone materials, it is also necessary to avoid long-term accumulation on the surface of stone materials. In areas with large traffic, it is inevitable to polish and wax frequently, and it is difficult for ordinary consumers to clearly understand the correct choice of use. When necessary, they should analyze the type and environment of stone and choose the appropriate wax.

2. When choosing wax for stone care, try to use wax water without pigment. Stone is a porous material, and wax water containing pigment is easy to cause stone pollution. Or before waxing, confirm that the stone surface has been treated with waterproof or oil-proof curing to prevent pollution.

3. Many wax water contains acid and alkali substances, which will destroy the natural luster of the stone surface, and the luminosity and color of the stone will become dim. Avoid using acid and alkali substances to contact its surface. For example, acid will decompose carbonate marble, and alkali will corrode feldspar and timely mineral crystals in granite, causing stone surface corrosion, which is not worth the loss. Before use, test the wax water with test paper to understand its properties.

4. After the floor is bored, wax it evenly. Shake the container filled with floor wax and mix well. Carefully alter according to the wood grain direction of the floor, and don't miss coating or uneven thickness. Too little alteration will cause uneven shading, and too much alteration will cause poor film formation. Sticking to uniform thickness is the key to waxing. No, dilute the floor wax with water. Waxing things can be waxed with a special mop, which is simple in operation and ideal in function.

Waxing and polishing of stone is very important, and details need to be considered during construction. That's what Bian Xiao introduced to you, that's all.