How to use the hand-propelled floor washer correctly?

First of all, before using the scrubber, it is necessary to check whether the power of the scrubber is sufficient, then turn on the panel switch, install the needle board, scrubber and suction scraper. Secondly, open the water tank of the washing machine and inject clean water into the clean water tank. According to the ground stains, add a proper amount of detergent, and then cover the water tank tightly. Gently press the pedal of the brush tray, put down the brush tray and suction scraper, then press the brush tray and suction scraper switch to adjust the water quantity and the speed of the washing machine according to the dirt of the ground.

After cleaning, first turn off the brush button, step on the brush pedal and lift the brush. Then turn off the water suction motor button after the water suction scraper sucks up all the accumulated water on the ground, and turn off the washing machine key after all the functions of the machine stop. Then open the cover of the water tank to discharge sewage and clean water, and rinse the residue and filter screen in the sewage tank with clean water.

After the industrial washing machine is completed, it is necessary to empty the clean water tank, otherwise the accumulated water will become the source of bacteria. Empty and clean the sewage tank. When the electric washing machine is in use, when the machine collects the mixture containing sludge, they often accumulate in the water tank and give off an unpleasant smell. Therefore, it is necessary to clean the water tank of electric washing machine with flowing water.