What should I do if the light suddenly trips? I pressed the switch, but there was still no electricity.

What should I do if the light suddenly trips? I pressed the switch, and the battery is still leaking, or your leakage switch is not ready. The leakage switch has a small key. If you press it, it will jump up, the switch will jump down, then press the switch and try again.

The switch at home jumped. What if the switch is changed and there is still no electricity? Check whether the line is disconnected. If there is no problem, find the property and see if the entrance switch downstairs has jumped.

The home suddenly tripped, but why did you close the brakes again and there was no electricity? Most of the trips are short circuits. Generally, there is an air switch at home and one unit. Just look for someone from work.

1, tripping is mostly short circuit. Generally, there is an air switch at home and one unit. Just look for someone from work. But you must find the short circuit in your home. Generally, the air switch at home is shunt. You turn off this short circuit first and push the others up. A room without lights is short-circuited. Then you find the short circuit in this line, fix it, and finally press all the switches.

2. Your home may be a leakage switch. If so, you should press the square button before closing it.

There is a small button on the leakage switch. Click it and see if you can push it up. If it still doesn't work, there may be a short circuit or leakage somewhere.

What if there is still no electricity after a sudden trip? My brake switch doesn't have a reset button. There are only two keys. First measure whether there is electricity at the lower end after closing with an electric pen. If there is, it may be a short circuit in the room. If not, change the switch.

When I turned on the light to take a bath tonight, I suddenly heard Peng's voice and found the switch jumped. When the switch was turned on, the whole house was dead. Your bathroom light, exhaust, water heater and other equipment are all short-circuited. It is necessary to check the circuit.

What if the switch doesn't jump but there is no electricity? There may be arrears, so it is recommended to check the electricity meter.

There are several reasons why the switch does not trip or there is no electricity, and different solutions are adopted for different reasons:

I owe money. Go to the property or power company or online platform to pay the electricity bill;

The power went out. Ask about the reason for the power outage and the approximate time of the call, and switch to other lighting methods to wait for the call.

The power cord is broken. Find a property or regional power grid company for repair.

The switch is broken. It is also for maintenance.

The lights at home will not light up, and the socket has electricity, but the electrical appliances will not start when plugged in. It may be that the neutral line is broken or the voltage is low. Find a professional technician to repair it.

The light in the bathroom suddenly went out and the main brake jumped. Have you set up a separate circuit in your bathroom? If it is set separately, don't press the air switch to control the bathroom at present, and then push the knife up to try. The bathroom won't jump without turning on the light switch, that is, there is something wrong with the wiring in the bathroom.

What is the reason for the sudden failure of the crane trip switch? Maybe it's lack of phase. After the motor is out of phase, the rated working current will increase, which will lead to the related idle overload trip protection. As for whether the motor burned out one of the phases or the power supply lacked the phase, it needs to be checked and confirmed.

The switch always trips. How to fix the switch? If the switch is good, check the circuit for looseness or leakage. If the circuit is normal, the switch is damaged and needs to be replaced.

Usually it will not trip when charging, plug it in when there is no electricity, and it will trip when there is electricity suddenly. What happened? This is the reason why your circuit breaker has low power and can't carry the surge current. Just replace it with a slightly larger circuit breaker.