How to reset the yellow light when the meter shows tripping?

The instrument shows that the yellow light will trip in the following two ways:

1, see if there is any arrears, and suggest calling the meter reader or the expense reminder in the area. When the meter trips and the light turns yellow, there may be no electricity bill, so it needs to be paid in time. After paying the electricity bill, you can push the meter up, insert chopsticks into the small hole in the meter panel, and press and hold the reset button for 5 seconds. The indicator light does not flash, but the pulse light is on, which will restore the normal state of the instrument.

2. Electrical appliances or circuits at home are leaking or short-circuited. At this time, unplug all the plugs and plug them in one by one. Knowing the cause of the yellow light trip can solve the problem.

After tripping, check the wiring and electrical appliances first. Generally, there is a small blue button on the leakage protection board, which will pop up when leakage occurs. Press it back first, then turn on the switch. If the trip is caused by electrical overload, the related appliances must be powered off to recover. If the trip cannot be pushed up, reset the leakage protector button, which is a small square button on the edge of the main brake, and then push up the blue main brake. In fact, tripping is a kind of circuit self-protection action, which can protect electrical appliances from electricity accidents when the circuit is not operating normally.