Is it true that Beijing prohibits changing floor heating?

In Beijing, a city with an inch of land and gold, choosing to install floor heating will not only occupy more space, but also meet people's physiological needs from bottom to top, and it can also prevent mold, moth and bacteria. However, it is actually a very dangerous thing to change the floor heating privately, and the construction can only be carried out after it is clearly understood. So can Beijing change the floor heating? What problems should we pay attention to when changing the floor heating? Let's have a brief look with Bian Xiao.

First, the harm of privately changing floor heating

1, different water temperature, easy to damage the floor.

In Beijing, most residential areas have installed heat sinks, but because the effect of heat sinks is not as good as floor heating, it is actually not feasible for some owners to directly change heat sinks into floor heating during the decoration process. Because the water supply temperature of radiator and floor heating is different, the water temperature of floor heating is generally around 40 degrees, while the temperature of radiator is around 70 degrees. Therefore, changing the radiator into floor heating without permission may damage and leak the floor heating pipeline or tilt the floor.

2, the required flow is different, which easily affects the heating quality of the whole community.

The floor heating is very uniform, and the hot air is from bottom to top, giving people a very comfortable feeling. But if you want to change the radiator to floor heating privately, it is impossible. Because in general, the flow required for radiator heating is only about half that of floor heating, if only some users in the community love it more, it will easily affect the heating quality of the whole community.

Second, the method of changing floor heating in Beijing

The first step is to level the ground, and then lay insulation materials. It should be noted that the laying should be smooth, especially the overlapping part, which must be tight, otherwise it will easily leave potential safety hazards. In addition, besides the plastic card for fixing the heating tube, it is also necessary to lay polyester film or laminated aluminum foil reflective layer.

Step 2: Pay-off and pipeline engineering according to the design drawings. If there is a lead mark on the reflective film, it can be omitted.

Third, in the process of installing the heating pipe, it should be noted that the bending radius should not be less than 8 times of the outside diameter of the pipe, otherwise it will easily damage the material and affect the use.

Step 4: When making the filling layer, no seams are allowed, but it can be fixed with heating pipes. The specific method can be to fix the distance between two points with a heating pipe first, and then fix a straight pipe ≤700mm and a bent pipe ≤350mm at the corner. It should be noted that there must be at least five fixing clips in the fixed position, which is more firm.

Step 5: After the heating pipe is connected to the assembly and distribution device, check whether it is firm, and then clean it one by one until the water is clean.

Three. Matters needing attention in changing floor heating in Beijing

1. Choose a professional floor heating company.

Floor heating is a complicated matter, and it is easy to leave hidden dangers if it is not done well, so we must choose a professional floor heating company for construction. In this way, it will be more professional from scheme design to product selection, and the insulation effect will be better. Further, choose a professional floor heating company, and the after-sales service will be more professional.

2. Choose a company with rich construction experience.

The most important thing to install floor heating is good insulation effect, plus it is a concealed project, and rectification and maintenance will be very troublesome, so you must choose an experienced floor heating company. They can customize the most reasonable construction scheme according to the structure and orientation of the user's house, so that the heat energy distribution effect will be better.

Editor's summary: Floor heating has many advantages, but if it is changed privately, it will easily affect the heating quality of the residents downstairs and the residents in the community, so it is necessary to obtain the consent of the property and heating company before construction. Enough about the ban on floor heating in Beijing. I hope it helps you. If you want to know more, please follow Qijia. com。