Floor heating also needs cleaning. When is the best time to clean the floor heating?

Actually, this is not right. There are many heat sources for central heating in the north, and basically every household in the south burns its own gas-fired wall-hung boiler for heating, so the water quality is very different. The former has high-temperature water, while the latter has low-temperature water, and the latter was (mostly) protected during installation. In terms of scaling degree, the south is "far behind" than the north. The cleaning method is to use a cleaning machine and two water pipes to connect the tap water pipe at home, the cleaning machine and the valve of floor heating. When the cleaning machine started to work, water came out of the outlet pipe, which was really dirty, dirtier than the water in the sewer. So, I think it should be cleaned. It's already late autumn before you know it. Can winter be far behind? In order not to freeze into dogs in winter, it's time to keep warm for the winter. Home floor heating is more comfortable and healthy than air conditioning, but if the circulating system is not cleaned, the heating efficiency will decrease and cleaning will be troublesome. What should we do?

Now every household has floor heating, which really benefits the people. But after a year or two, you will find that the floor heating is not as hot as before. The indoor temperature of users on the same floor is also different. Is it that the property is playing tricks? The real reason is actually like this. If the pipeline is not cleaned effectively for a long time, on the one hand, the water flow will be reduced, the flow rate will be slowed down, and the indoor temperature will also drop significantly; On the other hand, what is more serious is that the pipeline may be blocked and cannot be dredged, resulting in the permanent failure of the floor heating pipeline, which is irreversible.

Theoretically, domestic heating is a closed cycle, and it will not be dirty under the condition of oxygen blocking pipeline. Injecting fresh water into the system usually corrodes metal parts. After the floor slab is poured, the movable splicing formwork with grooves on the surface is laid, and then the geothermal pipe is embedded in the grooves of the formwork, and finally the composite floor is laid on it. The purpose of this is to replace or clean the geothermal pipeline more conveniently. Look at the color of the distribution manifold pipe. If it turns brown, black, green and other dark colors, it is necessary to carry out floor heating cleaning at this time, because there are already many calcium and magnesium ions in it.