What is the reason for the resurgence of the room walls? What should I do with it?

The reason of wall resurgence: the waterproof damage of building wall ground leads to building leakage. If this is the reason for the resurgence of our walls, you must contact real estate or real estate developers to rectify the walls of buildings in all directions. The wall of the building is leaking, and the rain and snow weather is very obvious. This is also a problem that community owners can't handle on their own.

If our bathroom is not well waterproof, it will cause the wall to be wet and cold. Usually, this kind of thing often happens when the bathroom is converted into a light wall. The wall of shower room should be moisture-proof, and the relative waterproof height must be 1.8 to 2 meters. It can't be 30cm as before. Otherwise, the water vapor will be absorbed into the wall of the lamp body by the floor tile and digested and absorbed by the aerated brick. After a long time, the wall was pierced, making the other wall without brick wet, cold and moldy. If this is the case, it needs to be moistureproof again.

Usually, when water splashes on the vulgar wall, everyone's kitchen and bathroom will be wet and cold. This kind of thing is a common reason for the resurgence of walls. This is more likely to appear on the wall under the whole cabinet and bathroom cabinet. This is also because when washing vegetables and fruits and washing dishes, water will splash along the wall of the whole cabinet. It is suggested that structural adhesive be used to fill the joints between the whole cabinet, box and wall to avoid the problems of water fluidity and wall moisture regain.

Application of dehumidifier: When the house is damp and monotonous, activated carbon can be used to develop waterproof and hygroscopicity. Monotone and activated carbon can be used. There are many kinds of monotonous waterproof and dehumidifying products in shopping malls, among which dehumidifiers and dehumidifying bags are the most common. Gas dehumidifier: Like a vacuum cleaner, it can combine moist gas until the water in the body becomes water in many cases. Apply air conditioning dehumidification mode. Generally, the central air conditioner used at home has the function of dehumidification, but the effect of dispatching the relative humidity of central air by central air conditioner is relatively slow, usually taking two or three hours, and it will make people in the house feel very cold.

Use lime powder and bamboo fiber to remove moisture: put a proper amount of lime powder in a small cloth bag, bundle it into small bags and put it in every corner of the house. Lime powder itself has the practical effect of eliminating dampness, and can also alleviate the indoor humidity. At the same time, lime powder has the function of disinfection and sterilization, killing two birds with one stone. Bamboo fiber dehumidification can be used repeatedly, but often. Without it, the actual effect is not very good.

Close the doors and windows to prevent moisture and water: usually, indoor ventilation should be used to reduce indoor water vapor composition. Especially in newly renovated new houses, the water vapor is particularly strong, and natural ventilation is needed to completely eliminate the moisture in the body. Close the doors and windows to prevent moisture and water: usually, indoor ventilation should be used to reduce indoor water vapor composition. Especially in newly renovated new houses, the water vapor is particularly strong, and natural ventilation is needed to completely eliminate the moisture in the body.