Electric welding contract

Model welding contract (6 selected articles)

With the deepening of people's understanding of the law, the contract plays an increasingly important role, and the signing of the contract is the best specification of the rights and obligations of both parties. So how to draw up a contract? Presumably this makes everyone very upset. The following are the welding contract samples (selected 6 pieces) I collected for reference only. Let's have a look.

Welding Contract 1 Party A: (hereinafter referred to as Party A)

Party B: (hereinafter referred to as Party B)

According to the needs of Party A's engineering tasks, through friendly negotiation between Party A and Party B, on the basis of equality, mutual benefit and friendly cooperation, Party A contracts the electric welding project to Party B for construction in the form of clearing the package. In order to clarify the responsibilities and rights of Party A and Party B, this agreement is specially signed for both parties to abide by and implement. The specific terms are as follows:

I. Project Name Project Address:

_ _ _ _ _ road

Second, the project unit price:

42/m2 (450 yuan per square meter) (including all outer frames of experimental tower and welded outer frames)

Third, the structure type:

structure

Four. Temporary area:

1000 square meters

Verb (abbreviation of verb) signing method:

Party B's packaging cleanliness, packaging quality, packaging safety, packaging accessories (cutting pieces, covered electrode, tools, etc. ), package schedule (package duration), package civilized construction, package accommodation and domestic electricity) and package structure acceptance.

VI. Contents and requirements of the contract:

1. According to the requirements of drawings, on-site disclosure and electric welding acceptance, the required welded components shall be welded (electric welding and gas cutting), cut, processed horizontally and vertically. Weld quality must meet the requirements of welding technical acceptance specification. Welding work includes the completion and acceptance of the whole project. Welders must have a special type of work operation certificate and hold relevant certificates.

2. Civilization standardization and cleaning within the scope of work.

3. Safe and civilized construction within the scope of contracted projects.

4. Productive temporary erection and demolition, etc.

Seven, engineering quality standards:

100% excellent rate. According to the quality requirements, Party B must carry out the construction of each working procedure in strict accordance with the quality acceptance standards and construction specifications. After each working procedure is completed, Party B must first conduct self-inspection and mutual inspection, and then notify Party A for acceptance. After acceptance, the next working procedure can only be carried out if it meets the quality standards. Can not meet the quality standards, must be in accordance with the acceptance of the rectification measures and requirements for rectification, until the standard. If the rectification still fails to meet the requirements, Party B must bear the double fine imposed on Party A by the general contractor as compensation for Party A's reputation.

Eight, time limit for a project requirements:

The total construction period is 15 days (according to the general contractor schedule). If the project cannot be completed within the required time limit, resulting in the general contractor imposing a fine on Party A's construction period, it will be punished by twice the total contract price of Party B. ..

Nine, safety requirements and comprehensive management;

1. Organize the construction in strict accordance with the safety standards according to the relevant management regulations of safety production in engineering construction to ensure the safety construction. In case of life safety accident, Party B shall bear all economic and legal responsibilities arising therefrom. In case of major safety accidents, it shall immediately report to the relevant departments, and notify the representative of Party A to take corresponding emergency measures.

2. Strictly abide by all laws and regulations, obey the command of Party A and other relevant departments, and consciously abide by Party A's rules and regulations.

3. Party B must complete all relevant certificates when entering the site, and submit copies and rosters to Party A for filing. Party B shall purchase accident insurance for construction personnel. If Party A does not buy, Party A has the right to buy, and the expenses shall be paid by Party B (about 250.00 yuan per person per month).

4, enter the construction site must correctly use and wear all kinds of safety protection articles.

5. It is forbidden to pull and connect wires in the dormitory. It is forbidden to cook in the dormitory. All electrical equipment is prohibited in the dormitory.

6. Party B shall be responsible for all public security incidents inside and outside the construction area.

X. responsibilities of party a:

1. Be responsible for the technical disclosure of quality, safety, progress, civilized construction and operation specifications to Party B. If Party B fails to meet the requirements of quality, progress, civilized construction and comprehensive management, Party A has the right to unilaterally terminate the agreement, and the quantities will not be settled as compensation for Party A's reputation loss. Party B shall compensate Party A for its economic losses.

2. According to the site conditions, Party B shall be provided with room and board at its own expense.

3. Actively create construction conditions for Party B and do a good job of coordination.

4. Supervise and inspect the quality, safety, progress and civilized construction of Party B, and put forward rectification opinions and measures for those that do not meet the requirements. If Party B's rectification fails to meet the requirements or refuses to rectify, Party A has the right to send someone to rectify, and the expenses will be deducted from Party B's labor expenses at twice the amount of rectification work.

XI。 Party B's responsibilities:

1. Organize the corresponding construction personnel according to the contract quantities. Personnel entering the site must hold relevant certificates, with good ideological quality and strong technical ability.

2. Be familiar with the construction drawings, organize the construction in strict accordance with Party A's design requirements, ensure the quality, progress and safety of the project, and be responsible for the rework caused by poor management and failure to meet the quality standards, as well as the resulting loss of engineering quantity and construction period.

3. The personnel entering Party B's site must be relatively stable, and team members shall not be changed at will without Party A's consent. ..

4. Accept the technical disclosure, education and supervision of quality, safety and civilized construction of Party A and the general contractor, and obey the command.

5. The rectification opinions put forward by Party A shall be immediately rectified by personnel until reaching the standard.

6. Take good care of all kinds of facilities and equipment on site, and do not damage them at will. If there is any damage, compensation and punishment shall be paid at twice its value.

Twelve, civilization standardization, health requirements:

1, do a good job in personal, dormitory, site hygiene, keep civilized and clean at any time.

2, in accordance with the requirements of civilized standardization, carefully to classify the materials within the scope of their own contract, neatly stacked.

3, after the completion of each working procedure, must do a good job of cleaning up after work, can use the materials must be used.

4 can not meet the above requirements, according to its nature, scope and value, impose a fine of more than two times, each at least not less than 50 yuan.

Thirteen, labor settlement and payment:

Settlement method: calculated according to the measured area. Party B shall be paid the living expenses of 65,438+00,000.00 Yuan within two days after the commencement of construction, and 80% of the labor expenses (including borrowing living expenses and fines) shall be paid within seven days after the acceptance of the main steel frame. The remaining 20% will be paid within seven days after the project is completely completed and accepted.

Fourteen Others:

1. If there are any matters not covered in this agreement, Party A and Party B shall sign a supplementary agreement through consultation.

2. This agreement is made in duplicate, each party holds one copy, which has the same legal effect.

3. This agreement shall come into force from the date of signing until the project payment is paid in full.

4. Party A shall provide a set of work clothes, and 30 yuan shall be deducted from Party B's project payment for each set. (Safety helmet and safety belt, etc. ) provided by Party B. ..

Party A:

Party B:

Date of signing:

Welding Contract 2 Party A:

Party B:

In order to further improve the internal contract management mechanism, clarify the responsibility cost management, standardize the project management behavior, reasonably determine the internal distribution relationship, mobilize all employees to actively reduce costs and create the best economic benefits. According to the Group's Measures for the Implementation of Responsibility Cost Management of Engineering Projects and relevant regulations, this project responsibility cost contract is specially signed.

First, the scope and content of the contracted project:

1, project name:

2. Scope of contract:

3. Project content:

Second, the way of contracting.

Project responsibility budget contracting

Third, the term of the contract.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * _ _ _ _ _ _ _ _.

Fourth, the contract indicators.

1. Total project responsibility budget: _ _ yuan.

(1) Total salary: _ _ yuan.

(2) Material cost: _ _ yuan.

(3) Rental fee for machinery and equipment: RMB _ _ _ _.

(4) Temporary facility fee: RMB.

(5) Management fee (management fee): _ _ _ _ yuan.

(6) Other expenses: _ _ yuan.

2. Expenses payable: RMB. Comprehensive delivery rate _ _ _%.

Verb (abbreviation of verb) cost adjustment of responsibility budget

If the change of contract scope, design change, claim or other factors causes the increase or decrease of expenses to meet the dynamic adjustment conditions of responsibility budget, Party B shall provide visa information, prepare supplementary budget of responsibility expenses, and report it to Party A for on-site demonstration and verification, so as to adjust the budget of responsibility expenses according to the facts.

Rights and obligations of both sides of intransitive verbs

(1) Party A:

1, according to the contract, supervise Party B to manage the construction and production, and do a good job of guidance and coordination.

2. Supervise, inspect and assess various economic and technical indicators at any time to ensure the performance of contract responsibilities.

3. Conduct performance appraisal for party and government supervisors in accordance with the Measures for the Management of Responsibility Cost of Engineering Projects. If Party B's poor management eventually leads to the loss of responsibility budget expenses, it shall make corresponding treatment after checking with relevant departments.

(2) Party B:

1. Be fully responsible for the responsibility budget expenses approved by Party A. ..

2. We must fully fulfill our responsibilities under this contract, and formulate and improve the dynamic management of the whole process of project responsibility budget cost.

3. According to the fund situation of the construction unit, timely pay the fees payable to Party A in the form of monetary funds.

4. Optimize the construction organization design scheme, reasonably divide the costs and expenses, and sign the "responsibility index" contract with the responsible subject in time.

Seven, assessment and rewards and punishments

Formulated by the superior of the responsibility cost contracting unit.

Eight. supplementary terms

1. Matters not covered in this contract shall be settled by both parties through consultation.

2. The terms of this contract are applicable to the signing between the superior organization of the Project Department and the Project Department. In the case of the responsibility cost management of the project department of China Railway 12th Bureau Group, the contract signed between the project department and the responsible subject can be formulated with reference to the "zero profit" responsibility budget contract of the cost center.

3. During the execution of this contract, the change of the responsible persons of both parties will not affect the execution of this contract.

4. This contract shall come into effect as of the date of signing, and shall automatically terminate upon the expiration of the liability period.

5. The original of this contract is in duplicate, one for each party, and two copies for each party.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Welding Contract 3 Party A: _ _ _ _ _ _ _ _ _ Project Management Department

Party B: Electric welder

1, welders must hold relevant certificates, accept the safety management and education of the head office, project, team (or labor service team) with an open mind, and operate according to safety disclosure and safety operation procedures.

2. The switch box should be locked, and the switch should be locked when not in use or in maintenance. Please don't close it while it is being repaired.

3, switch box are not allowed to put sundry, are not allowed to use other metal wire instead of fuse.

4. When the primary line of the electric welding machine exceeds 2m, wires should be hung or other measures should be taken to prevent wear and leakage; If working on metal structures, it is necessary to ensure the integrity of wire insulation.

5. When welding, you must wear protective equipment such as masks, fasten your seat belt when welding at high altitude on scaffolding, wear asbestos gloves when welding at high altitude, wear insulating rubber shoes when working in humid environment, and prevent electric leakage in areas such as electrode holders.

6. Except the wheel line joint on the welder can be disassembled by the welder, only electricians are allowed to disassemble and assemble other power cables.

7. After electrifying, the welder shall not touch the uninsulated conductive part of the welder, and find an electrician to repair the leakage.

8. Before welding containers, pipelines and oil circuits that have stored oil or natural gas, you must first understand the relevant safety operation procedures and take guaranteed safety measures according to regulations, otherwise welding is not allowed.

9, welders are not allowed to move iodine tungsten lamp and other unsafe working lights with electricity, and are not allowed to work at heights after drinking.

10, when welding, it is necessary to clean up flammable materials that may cause fire when welding slag splashes; Electrode holders and weldments should be put away to prevent fire caused by heating.

1 1, correct your own safety hazards in time, point out other people's safety hazards in time and help eliminate them, and report the hidden dangers that you can't handle to your superiors and project safety personnel in time.

12. Be responsible for the violations and accidents caused by your own fault, and be willing to accept the corresponding punishment of the company and the project. Personal punishment of welders cannot exempt or reduce the responsibility that the project should bear for production safety accident casualties according to law.

Representative of Party A (signature): _ _ _ _ _ _

Signature (seal) of Party B: _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Welding Contract 4: _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party A)

Contractor: _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party B)

According to the Civil Law of People's Republic of China (PRC), the Building Law of People's Republic of China (PRC) and relevant laws and regulations, combined with the actual situation of this project, Party A and Party B have reached the following agreement on the contract of sporadic welders on the basis of equality, voluntariness and consensus:

Article 1 General situation of the project

1. Project name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Electric welding project (hereinafter referred to as this project)

2. Project location: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

3. Contract content: positioning and welding of water stop steel plate, column wall foot reinforcement, reserved hole, elevator entrance protective railing and protective flat net, brick wall Rachel reinforcement, passenger and freight elevator protective door, etc.

4. Contracting method: Contract to Party B for construction by contracting labor, machinery, covered electrode saw blades and other auxiliary equipment materials and final distribution box.

Article 2 Construction period

The construction period of this project is determined by Party A according to the actual construction progress of the project. Party B must enter the site within _ _ _ _ _ _ _ _ hours after receiving the notice from Party A, and complete the project construction in strict accordance with the construction progress time arranged by Party A. ..

Article 3 Contract Unit Price and Settlement Method

1, the unit price of the basement water-stop steel plate welding installation contract is _ _ _ _ _ _ _ _ yuan/meter.

2. Positioning of steel bars at the foot of columns of stairs and floors, three-proof and four-port horizontal protective nets and protective railings. Lump sum price: 120 yuan/stairs and floors (except temporary railings of stairs).

3. Unit price of steel bar planting: φ18: _ _ _ _ _ _ yuan/root; φ16: _ _ _ _ _ _ yuan/root; φ14: _ _ _ _ _ _ yuan/root; φ 12,10: _ _ _ _ _ _ _ yuan/root.

4. Welded wall reinforcement: _ _ _ _ _ _ _ Yuan/root, rebar adhesive: _ _ _ _ _ _ _ Yuan/root, rebar epoxy resin: _ _ _ _ _ _ _ Yuan/root. (The total price includes rebar glue or epoxy resin)

5. System and installation (including painting) of protective doors such as passenger and cargo elevator platforms: _ _ _ _ _ _ _ Yuan/fan, and the warranty period is _ _ _ _ _ _ _ _ _ months.

6. Wage for odd jobs: _ _ _ _ _ _ _ Yuan/working day. (Including covered electrode, welding tools, etc. )

7. Except for lump-sum projects, the actual quantities shall be subject to the number of visas issued by Party A, and the project payment shall be calculated by multiplying the actual completed quantities by the lump-sum price.

Article 4 Payment Terms

According to buildings 6 # 8 #10 #1#17 # and 7#9# 12# 13#, each area is divided into two areas. After the basement project is completed, the upper main structure will be paid in three stages: nine floors and capping. After the completion of each stage, Party B shall submit the progress completion quantity, and after being reviewed by Party A, Party B shall pay the progress payment at _ _ _ _ _% of the completion quantity. I will pay the rest in one lump sum within 7 days after the completion and acceptance of the reception project.

Article 5 Quality Requirements

Party B shall organize the construction according to the specification requirements in the national standard "Quality Standard and Inspection Evaluation Form for Construction Projects", and the quality grade of this project shall reach the qualified standard.

Article 6 Party A's responsibilities

1. Party A is responsible for providing power supply, water source, materials manufacturing and installation site.

2. Supply steel materials in time according to the material plan proposed by Party B..

3, responsible for coordinating the cross operation of various subdivisional work on the construction site.

4. Supervise the construction quality, progress and safety of Party B..

5. If the drawings or site size changes, and the items increase or decrease, Party B shall be informed in time.

6. The installation contract stipulates that the project cost shall be paid by Party B..

Article 7 Responsibility of Party B

1. Party B shall carry out the construction in strict accordance with the design drawings and the requirements of the project department, ensure the quality and quantity, and complete the task on schedule. Quality problems during operation must be eliminated, and it is obligatory to provide test pieces and samples for inspection. For quality problems caused by Party B's responsibility, Party B shall bear its economic losses.

2. Party B must take out accidental injury insurance for the employees engaged in dangerous operations, and take out insurance for the life and property of its personnel and construction machinery and equipment at the construction site and pay the insurance premium. In the course of construction, if Party A or a third party is damaged, Party B shall be liable for compensation.

3. Without the written consent of Party A, Party B shall not subcontract this project to others, nor shall it subcontract all or part of the subcontracted project to others. If Party B subcontracts or subcontracts the subcontracted project, Party A has the right to terminate this contract, and Party B shall be responsible for the compensation for the economic losses caused thereby.

4. covered electrode, rebar glue or epoxy resin used in Party B's construction must meet the design and specification requirements, and report the material certificate and the manufacturer's inspection report; Otherwise, Party A has the right to require Party B to rectify immediately, and the economic losses caused thereby shall be borne by Party B. ..

5. Party B must sign a labor contract with the workers in this class and report it to Party A for the record. It is forbidden to use child labor and people without legal procedures to participate in team production. If found, everyone will be fined _ _ _ _ _.

6. Party B shall pay the wages to the workers in time, register them and report them to Party A for the record. If a labor dispute arises due to the failure to pay the wages to the workers in time, Party B shall bear the relevant economic and legal responsibilities.

Article 8 Safe and civilized construction

Party B must strictly abide by the requirements of the current national and local codes for safe and civilized construction, and at the same time strictly fulfill the contents of the responsibility book for safe and civilized production on the construction site (see the annex for details).

Article 9 Liability for breach of contract

1. If Party B fails to complete the project within the time limit agreed in Article 2 of this contract, Party A has the right to refuse to pay the project payment, and Party B shall pay Party A RMB _ _ _ _ _ _ _ _ _ _ _ _ _.

2. If Party B violates the provisions of Article 5 of this contract, resulting in the project quality failing to meet the standards agreed in this contract, Party B shall pay liquidated damages to Party A at 30% of the total project amount agreed in this contract, and Party B shall rework and repair it for free until it is qualified, and bear the compensation for the economic losses and construction delay caused thereby.

3. Unless otherwise agreed in this contract, if either party performs or fails to perform other obligations agreed in this contract, the breaching party shall pay liquidated damages to the observant party at _ _ _% of the total project payment agreed in this contract, and the observant party has the right to unilaterally terminate this contract at any time. If the economic losses caused to the observant party exceed the agreed amount of breach of contract, the breaching party shall still be liable for compensation.

4. Party A has the right to directly deduct the fines, damages and liquidated damages that Party B should pay to Party A from the project progress payment.

Article 10 Settlement of disputes

Disputes arising from the performance of this contract shall be settled by both parties through consultation. If negotiation fails, either party may apply to Fuzhou Arbitration Commission for arbitration.

Article 11 Others

1. If there are any matters not covered in this contract, both parties shall negotiate and sign a supplementary agreement. The supplementary agreement has the same legal effect as this contract.

2. This contract shall come into effect as of the date of signature and seal by both parties, and shall be invalid as of the date of completion of the contract.

3. This contract is made in duplicate, with each party holding one copy.

Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signature time: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Welding Contract 5 Lessor (Party A):

Lessee (Party B):

In accordance with the relevant provisions of the Contract Law of People's Republic of China (PRC), in line with the principle of equality and mutual benefit, and in order to clarify the rights and obligations of the lessor and the lessee, both parties reached an agreement on the lease of variable frequency DC welding machine through friendly negotiation, and agreed to sign this contract according to the following terms.

I. Model, status and quantity of leased equipment

1, name:

2. Specifications and models:

3. Quantity:

4. Equipment condition: good

5. Manufacturer:

Two. Time, place and acceptance method of delivery of leased equipment

1. Delivery time: 20 _ _ _ _ _ _ _ _ _.

2. Place of delivery: the lessor's equipment warehouse.

3. Acceptance method of delivery and lease back: The welding machine can be used normally, with good performance and qualified acceptance.

Third, the lease term.

The lease term of this contract is from MM DD YY to MM DD YY.

Four, rental equipment into the site

The lessor shall be responsible for the entry and exit of electric welding machines, and bear the expenses and safety responsibilities during the entry and exit.

Verb (abbreviation of verb) lease mode, rent settlement and payment

1. Lease method: monthly rent settlement.

2. Lease price: deposit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. Settlement time: from the signing date, the borrowing date to the return date.

4. Settlement method: one-time settlement after use. After settlement, the deposit will be refunded.

Damage and loss of rental equipment

1. If the equipment is lost or damaged due to the reasons of the Lessor (the operator of the Lessor fails to park and keep the equipment as required by the Lessee, or fails to operate the equipment as required) or force majeure, Party B shall bear the loss or damage and compensate the corresponding expenses according to the price.

2. This contract is made in duplicate, with each party holding one copy.

Lessor:

Entrusted agent:

Contact person:

Lessee:

Entrusted agent:

Contact person:

Guarantor:

Welding Contract 6 Party A:

Party B:

Party A employs Party B as a quarry welder, and through equal consultation, both parties voluntarily reach the following employment contract:

1. Party B must obey the leadership and management of Party A, abide by Party A's rules and regulations, have a sense of responsibility and a serious and responsible attitude, and ensure the safe use of electricity and the normal use of electricity on site (to ensure welding safety).

2. If Party A needs to repair the line in production, Party B shall arrive at the site as soon as possible after receiving the notice.

Three. Party B shall operate according to the regulations in the work. Pay attention to your own safety. (Acetylene and oxygen equipment used in electric welding should be regularly checked and maintained. If unsafe factors and hidden dangers are found, they shall be reported to Party A in time and eliminated. If Party B fails to do the above or the consequences are caused by Party B's own reasons, all responsibilities and expenses shall be borne by Party B. ..

Four. Party A shall pay Party B a service fee of RMB 65,438+00,000 every year.

5. During the validity period of this contract, if either party unilaterally terminates the contract, it shall bear the liability for breach of contract and pay the other party a penalty of RMB 65,438+00,000.

6. This contract will be terminated when it expires. If one party wants to renew the contract, it should put forward it within one month before the expiration of the contract. This will be determined through the cooperation of both parties. If Party B does not want to renew the contract, it shall notify the relevant leaders of the venue about the circuit.

Seven. This contract begins on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ This contract is made in duplicate, one for each party.

Party A: Xinxin Comprehensive Sand Yard in Zhaokua Town

Party B:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

;