Will air-conditioning holes dirty the walls? How to prevent air conditioning punching from polluting the wall?

There is no reserved air conditioning hole when the house is decorated, and holes can be punched when installing air conditioning. This may be completely reassuring! In the early stage of house decoration, the location of air conditioner will be confirmed when water and electricity are located. During hydropower construction, sockets will be reserved and air conditioning holes will be drilled in advance. Air conditioning can be installed directly in the later stage to avoid the pollution to the wall when drilling holes in the later stage and ensure the air conditioning layout is very smooth! But if you really forget to punch air conditioning holes in advance or want to add air conditioning later, don't worry. This is not difficult for the master who specially installs air conditioners.

Air-conditioner installers can directly punch holes in the wall with diamonds, without water, to ensure that the wall is not polluted. When drilling, the master usually sticks a small bag under the drill bit to hold dust, so as to ensure that the wall is intact and the air conditioning installation is successfully completed. Of course, if you really want to install air conditioning, please use as little water as possible when punching holes, and then do all kinds of protective work. Finally, after the installation of the air conditioner is completed, let the oiler treat the wall. The total cost of this installation method is higher! Ordinary workers use rhinestones as air conditioners. Therefore, sewage will flow out and the walls will get dirty. If we don't add water to the diamond, it will not only damage the drill bit, but also cause a lot of dust indoors.

Although punching holes in the air conditioner will dirty the walls, we don't have to worry too much. The pollution is not very big. As long as it is wiped with a rag in time, it will generally have no effect. If we punch holes before the wall decoration, air-conditioning punching holes will pollute the wall, which has little impact, because we can cover up the past when decorating the wall, such as pasting wallpaper, so it will not affect the beauty of the wall. If we punch holes in the wall decoration, then we can cover the wall near the hole with plastic film to avoid polluting the wall when punching holes.

Find a waste shoe box, drill it with a drill first, and then put it into the drill. Use some sealed sponges at the hole of the shoe box to stick the shoe box to the wall. It is best to spread a layer of instant stickers around the borehole, which can also effectively prevent the garbage generated by the borehole from polluting the walls and floors. If conditions permit, you can choose to play from the outer wall. When striking, the drill bit can be tilted slightly upward, and the gypsum can be left behind. When you wear it, you won't forget the flow in the room. Indoor penetration parts shall be padded with clean rags to prevent dust from entering the room during penetration.