How to drive from Guangzhou Railway Station to Golden Eagle Building?

Driving route: The whole journey is about16.4km..

Starting point: Guangzhou Railway Station

1. Start from the starting point to the southwest, drive along Zhanqian Road for 40 meters, and turn left into Huanshi West Road.

2. Drive along Huanshi West Road for 470 meters, pass Longfei Building on the right about 1 10 meters, turn to Airport Road and enter the right roundabout.

3. Drive around the island120m, take the fourth exit, turn right ahead and get on the ramp.

4. Drive along the ramp140m and go straight into Jiefang North Road.

5. Drive along Jiefang North Road for 340 meters, drive in the direction of Airport Road/Guang Yuan Middle Road/Baiyun International Conference Center/Ring Expressway (westbound), turn right slightly and enter Jiefang North Road.

6. Drive 350 meters along Jiefang North Road and go straight into Airport Road.

7. Drive along Airport Road for 350m, pass by Zhongchang Building on the left for about140m, then turn right slightly in the direction of Guangyuan Middle Road/Ring Expressway (eastbound) and enter Airport Road overpass.

8. Drive along the Airport Road overpass120m, drive in the direction of Guangyuan East Road, and turn right slightly on the ramp.

9. Drive along the ramp 100 meters, pass the Jianxing Commercial Building on the left for about 50 meters, and go straight into Guangyuan Middle Road.

10. Drive along Guangyuan Middle Road for 670 meters. After passing the New Age Commercial Building on the right for about140m, turn right slightly.

1 1. Drive for 30 meters and turn left.

12. Drive 470 meters, at the entrance, enter G 15.

13. Drive 8.7 kilometers along G 15, drive in the direction of South China Expressway/Shaoguan/Panyu /G4, turn right slightly and enter Cencun Interchange.

14. Drive along Cencun Interchange for 600 meters, cross Cencun Interchange, drive towards South China Expressway (southbound)/Guangyuan Expressway/Zhongshan Avenue/Panyu, and turn right slightly to enter Cencun Interchange.

15. Drive along Cencun Interchange for 350 meters, and then turn right.

16. Drive 520 meters, at the entrance, and enter S303.

17. Drive 550 meters along S303 and turn right slightly in the direction of Guangyuan Expressway/Shahe/Wushan Road/Xintang.

18. Drive 130 meters, turn left ahead.

19. Drive for 270 meters and go straight.

20. Drive for 40 meters and turn right slightly in the direction of Wushan Road/Guangyuan Expressway/Yudong Road/Shahe.

2 1. Drive 100 meters, and then turn right.

22. Drive 90 meters at the entrance and enter Guangyuan Expressway.

23. Drive along Guangyuan Expressway 1.2km and get off at Wushan Road/Yuezhou Road/South China University of Technology/South China Agricultural University.

24. Drive130m and turn right into Ying Jin Road.

25. Drive along Ying Jin Road for 20 meters, and then turn left.

26. Drive 30 meters to the finish line (on the left side of the road).

Destination: Ying Jin Building.