What if termites are found in the warehouse?

(1) Dispersed hole application method: After the shunt hole is found in the field inspection, a screwdriver can be used to dig a few small holes in the concentrated part and inject the medicine. It is best to spray the medicine when termites are found, and spray the powder on termites. You can also use a screwdriver to insert along the wood grain from the flying hole and rotate to one side to pry open the seam and spray the medicine inward. It will be restored after spraying (if it cannot be restored, you can plug the hole with tasteless cotton and toilet paper). Proper application of pesticides means applying pesticides in the same room or door frame as much as possible, creating opportunities for all termite groups to contact pesticides. The effect of spraying ant powder through fly holes is remarkable, especially in the season when termites fly, so it is necessary to find fly holes to apply pesticide as much as possible.

(2) Application methods of floor-to-ceiling wooden doorframes and window frames: Modern buildings are mostly invaded by termites from floor-to-ceiling doorframes. The most common ones are floor-to-ceiling doorframes, especially the wooden doorframes in bathrooms, and the wooden window frames at the bottom are also very common. Therefore, it is one of the main application places to control termites in steel-concrete structures.

When termites are found in the door frame and window frame, focus on the base of the door frame and window frame, insert a screwdriver along the wood grain to pry open the seam and spray medicine inward. Try to apply it to the place where termites are harming, try to spray the medicine on termites, and try to restore the original state after spraying. The orifice is blocked with cotton or toilet paper. All doors and windows that are harmful or possibly harmful to termites should be treated with pesticides to ensure the effect. If termites are less harmful, use an electric drill that can't be inserted with a screwdriver to make a hole and spray medicine, and then plug the orifice after spraying. The upper end of the door and window frame is provided with flying holes, and medicine is applied at the flying holes. If there are no flying holes, apply the medicine to the affected area.

Such as columns, stairs, outdoor poles, etc. For old houses (brick and wood structures, mud and wood structures) damaged by termites, you can refer to pesticide control.

(3) Antway daubing method: When an ant way is found on walls, doorframes and furniture, a screwdriver can be used to gently draw a gap about 2 cm long in the middle of the ant way and blow a breath at the gap. When termites come to repair, they can spray medicine on both ends of the hole and try to spray medicine on termites. Be careful not to destroy the ant path too much and not to spray too many chemicals, so as not to affect the continued contact of termites.

(4) Application method of skirting board: The skirting board of modern building interior decoration is close to the ground, which often has the harm of termites. You can use a screwdriver and other tools to gently pry open a section every 50 cm or so and spray the medicine in. Also, you should try to spray the medicine on termites and try to restore it to its original state after spraying. The unrecoverable part should be blocked with cotton or toilet paper. Focus on dark and humid places and corners, and apply pesticides at intervals in places where termites are harmful.

(5) Ant daubing method on wooden floor: The room with sub-floor wood floor has high humidity, which is most prone to termite infestation. Among them, the floor rooms with ground joists are most seriously damaged by ants along the wall floor, corner and joists at both ends. We can first pry open a little more parts every 50 cm or so with a screwdriver and spray the medicine inward. We should also try to spray the medicine on termites and restore it to its original state after application. If there are ants in the center of the room, you can put joists along the floor, pry open the ant lanes at the floor junction as appropriate, pry open several lanes along the floor junction, and spray the medicine into the solid floor. For the floor that is not suitable for prying open, you can drill a small hole every 30 cm along the joist with an electric drill, and block the hole with toilet paper after spraying.

(6) Method of daubing furniture and materials covered with ants: Generally speaking, scattered termites that corrode furniture or other materials start from the base of cabinet feet, bed feet or the wall-attached part of bedding materials. First of all, it is necessary to apply pesticides to the wall-attached parts of the above parts according to the door frame daubing method. If there are termites in the wardrobe and file cloth in the material, it must be smeared in the place where termites are harmful, and the raw materials should be put back to their original places after smearing to avoid termites scattering.

Although the colony of Reticulitermes is small, and there may be multiple colonies in the same place, the harm scope of Reticulitermes in modern buildings has its limitations, and the control difficulty and labor are not great. As long as the relevant operation requirements are followed, the harm of termites can be effectively eliminated.