Job Recruitment Website - Property management company - What is the cleaning method of radiator?

What is the cleaning method of radiator?

Radiator is an efficient heating equipment. If the radiator runs for a long time, impurities and dirt will accumulate in it. If the bacteria are not cleaned up, it will easily affect the indoor hygiene and family health, hinder the radiator from radiating well, and seriously affect the indoor temperature. Therefore, it is necessary to clean the interior of the radiator to maintain its efficient operation and prolong its service life. So, what is the cleaning method of radiator? What should I pay attention to? Here are some small details about radiator cleaning.

Radiator cleaning-close the return water valve

Before cleaning, in order to ensure safety, all reflux valves must be closed, and then the plug on one side of the radiator must be gently unscrewed by hand with a wrench. Here, I would like to remind you that some water will flow out of the radiator by gently unscrewing the plug with your hand, so you can use the water in the basin to wash it accordingly.

Radiator Cleaning-Flush the radiator.

When the temperature control valve is opened, the corresponding flushing is carried out until the water flowing out of the radiator is clear. Once the water flowing out is clear, the temperature control valve can be closed. Take the same measures to clean the radiator in turn. After cleaning, open the water inlet valve and exhaust the radiator.

Radiator cleaning-Different radiators have different cleaning methods.

Different types of radiators adopt different cleaning methods. The steel column radiator is easy to clean, and the surface can be as bright as new just by wiping it with an ordinary towel; The distance between two adjacent columns is small, so you can use a "feather duster" made of chemical fiber. It is elastic and long enough to wipe all the heating gaps, and the duster can ensure that the dust will not fly around when it gets wet. As long as you put the wet rag into every gap, pull it back and forth like a saw, and wash the rag with water in time, you can clean the heating in a short time. The gap of copper-aluminum composite radiator is small, so you can use an abandoned telephone line or other slightly hard string to tie a wet rag at one end and pass the other end through the hole of the radiator. Then while shaking the rope, slowly pull the rag and repeat it several times to clean the radiator.