What fire information should the property receive?

From the fire protection point of view, the drawings include 1 and the general construction plan, so that we can know the outdoor fire prevention distance, fire lane, fire extinguishing surface and the location requirements of the fire truck operation site for future changes; 2, outdoor water supply general plan, can understand the location and quantity of outdoor fire hydrants, the number of outdoor fire water supply main pipes and valve positions; 3, indoor standard floor plan, can understand the division of fire zones on each floor and the location and number of stairwells; 4. Schematic diagram of fire water supply system design; 5, fire hydrant plan and fire hydrant riser system diagram; 6, spray each layer plane position diagram and spray riser system diagram; 7. Water supply diagram of roof water tank; 8, fire pump room water supply diagram; 9, fire alarm system design; 10, fire alarm system plan and system diagram; 1 1, design drawing of smoke control and extraction system; 12, plan and system diagram of fire control smoke control and extraction system; 13, electrical system design drawing; 14, emergency lighting design; 15, wiring diagram of fire-fighting equipment distribution cabinet; 16, drawings of other fire control facilities (if there is a gas fire extinguishing or water cannon system)

Data: 1. Certificates and test reports issued by all fire products manufacturers; 2, fire control facilities test report and electrical test report issued by the fire control institutions before acceptance; 3. Review and acceptance opinions issued by the fire brigade; 4, fire alarm host operating password and steps; 5, fire alarm system address coding table (with pictures is better)

In addition, the construction unit is also required to make permanent and obvious signs on all fire control facilities and pipelines, and the specific signs require the fire department to have unified requirements.