How to prevent electric vehicles from being stolen?

Anti-theft methods: First, the handlebar is equipped with a hidden switch, so that even if the front lock and the U lock are opened, the electrical switch wire cannot be short-circuited unless it is pushed or put on the truck. There are countermeasures below. Second, the switch is equipped with a hidden switch to prevent thieves from shorting the switch wire, and the hidden switch on the handle is double anti-theft. Thirdly, chain lock, I bought a 20-ton idle chain lock with anti-hydraulic pliers for my electric car. Pay attention to several key terms of my lock: the price of 20 tons idle lock core is about 200, which is not the most expensive, and it should be better than U lock. The purpose of using chain lock is to lock the car on the railing or other places that can be fixed to prevent thieves from loading the car on the truck. Idling the lock core can prolong the theft time. Fourth, install the anti-theft device of magnetic card lock motor. This equipment is found on the internet and is very practical. The principle is to lock the motor directly after turning on the switch, and you need to swipe your card (the size of an ordinary access card) to drive the car. But personally, there are several points that need to be strengthened: first, install a two-way burglar alarm; Second, install the disc brake lock; Third, install a hidden switch at the charging port. Now the thief will short-circuit the charging port to trip the switch inside, and the alarm will stop at this time. They boldly unlocked the lock, installed a hidden switch, turned off the switch when not charging, and the thief short-circuited the charging port without affecting the internal circuit. Fourth, hide air switches, alarms, etc.