Do I have to pay property fees if I fail to pass the house inspection? Matters needing attention and details of house viewing

When buying a house, you must check and accept the property, especially when handing over the house. Then, do you still need to pay property fees if you fail to pass the house inspection? This problem needs to be decided according to the specific house acceptance. What are the precautions and details of house inspection? Housing inspection needs to know a lot of common sense. The following small series will introduce it in detail.

Do I have to pay property fees if I fail to pass the house inspection?

According to Article 16 of the Measures for the Administration of Property Service Charges, if the completed but unsold property is not delivered to the property buyer on time due to the reasons of the development and construction unit, the property service fee or property service fund shall be paid in full by the development and construction unit. In other words, the priority of house inspection and property fee payment should be to pay property fee first. Housing quality problems or unqualified acceptance, should be repaired by the construction unit before re-acceptance, during which the property costs incurred by the construction unit.

Matters needing attention and details of house viewing

When you live in the house you bought, house inspection becomes an indispensable part of you. According to relevant research reports, property buyers should pay special attention to this link, otherwise it is easy to fall into the trap of developers.

In the acceptance of blank houses, walls and floors are the most important places with the largest area. We need to check whether the walls and floors of all rooms are flat and whether there are vacancies in the walls of the kitchen and bathroom. If the wall is uneven, it will bring a lot of trouble to the later decoration, and the uneven ground will also affect the later bricklaying or floor laying. If there are hollows on the walls of the bathroom and kitchen, it is easy to fall off after tiling.

In order to avoid and find these problems as soon as possible, we can use some daily and easy-to-operate soil methods to test, find a long straight board and stick it on the wall to see if it fits the wall. If the error of 1-2 mm is within the national standard, if the error is large, please ask the property manager to find a worker to erect this wall again. We can also take a book and lean against one of the 90-degree right-angled corners to see if it is perpendicular to the 90-degree angle of Yin and Yang. To see if there is an empty drum on the wall, you can test it with a small hammer and judge whether there is an empty drum on the wall by the sound made when knocking.

When checking the house, it is necessary to measure the height of the house (the maximum height error of a single floor should not exceed 1 cm, and generally it should be within 5 mm). In order to ensure the horizontal and vertical, most owners measure the four corners of the house with a tape measure. But in fact, this is not accurate, because the four corners are generally higher than other places, so the height measurement should be carried out at a distance of 50cm. But when the angle is outside 50cm, it is easy to produce errors.

Knock on the wall and the ground with a drum hammer to see if there is any empty drum on the wall. If the area is relatively small and the range is less than 20 cm, it is qualified. If the area is large, you can mark it on the wall.

Switch the safety door several times to see if it is flexible. Close the door and listen to the sound insulation effect. See if the cat's eye is crooked, the doorbell is normal, the door can be closed, grab the door frame with both hands and shake it hard to see if the door frame is shaking.

In the acceptance of doors and windows, it is very important to observe whether the doors and windows are firm, damaged in appearance and well sealed. That is to check whether the doors and windows are lined with steel. It is understood that generally adding steel linings at the four corners of doors and windows can strengthen doors and windows, prevent them from falling off, improve quality and ensure safety. Generally, there will be a special testing pen in the house inspection, and buyers can use magnets to test. Because doors and windows are all made of aluminum alloy, you will know whether there is a steel lining when you attract a magnet.

At the time of acceptance, every circuit should be carefully tested. Because it is an engineering embedded pipe, many situations are invisible. I've met it. I didn't find out when I checked the house. When we entered the market, we encountered all kinds of wrangling. The developer said that it had been signed, and everything had nothing to do with them.

The above content introduces the question of whether to pay property fees for unqualified houses. If it is unqualified, it needs to be handled and solved according to the specific acceptance management measures. You can learn more about these related contents and refer to them. What are the precautions and details of house inspection? You can refer to these specific precautions and details, which are very important for the inspection of the house and can be used.