Do you need to go through any formalities for knocking on the wall for decoration?

What are the procedures for knocking on the wall during decoration? Procedures before decorating and knocking on the wall:

Take the decoration design of the decoration structure to the property management center, and the management center will take the design to the design department for review. If it does not affect the design of the main structure of the building and endanger the main structure of the house, it will not agree!

First of all, we must report the property approval: under normal circumstances, when the building is completed, the original design unit will leave a drawing for the property company. The thickness and materials of various walls such as load-bearing walls and non-load-bearing walls are clearly marked on the drawings. The property company can determine which walls can be knocked according to the drawings. Therefore, before the wall reconstruction, the owner must submit the construction drawings given by the designer to the property management company, and the construction can only begin after the property is approved.

Can't the decoration knock out the load-bearing wall? What are the procedures? The housing security department submits a written application, and the load-bearing wall cannot be knocked. The fees are as follows:

Under 80 square meters, 400 yuan. 80- 100㎡, 500 yuan. /kloc-more than 0/00 square meter, 600 yuan.

Generally speaking, the walls of brick-concrete buildings are load-bearing walls; The walls in a general frame structure house are not load-bearing walls. Of course, specific to the building structure itself, to judge whether the wall is a load-bearing wall, it is necessary to carefully study the original building drawings and determine it after the actual site investigation.

The load-bearing wall is scientifically calculated. If the bearing wall is decorated with holes, it will affect the stability of the foundation. Need attention.

What are the procedures for decoration? The relevant matters concerning the decoration procedures are as follows: 1. Registration: apply for registration with local property management enterprises or housing management agencies. 2. Charge: There is no charge for registration and filing, and the property department will charge appropriately according to the nature of the service. 3. When applying for registration, you need to provide: 1, real estate license; 2. The applicant's identity card; 3. If the house is rented, a lease agreement shall be provided. 4. Need to change the structure: If it is necessary to change the main body or load-bearing structure, it shall submit the design scheme put forward by the original design unit or a design unit with corresponding qualification grade, and then the house safety appraisal department will issue an appraisal book.

Do we have to go through the formalities to decorate the wall? According to the property regulations of each residential area, breaking the wall should be based on the stress and space transformation of the wall, and the load-bearing wall cannot be demolished.

What procedures do I need to go through before renovation? Hello, you need to inform the property management company before the renovation, pay the renovation deposit, and they will give you a renovation permit to let your materials and workers enter the site for renovation.

What are the procedures for removing the load-bearing wall during decoration? Hello.

This needs to ask what procedures the property company needs, and the procedures for different needs of the property company are different. In principle, the property management company will not allow you to tear down and change the load-bearing wall. Usually, when the decoration meets the project of removing the bearing wall, you must negotiate with your property, and you must do a good job of reinforcement after removing the bearing wall. If the impact of the load-bearing wall is not particularly great, then I suggest that you do not choose to demolish the load-bearing wall. After all, the load-bearing wall is the pillar of the whole space, and the safety factor is definitely not as good as before.

I hope my answer can help you!

What are the procedures for decorating the house and prying the wall? Do I have to pay? There is no need to pay the fee, just do the decoration permit in the property when decorating.

What procedures do you need to go through to decorate the house and open the wall? Decoration should go through a procedure, but it is not necessary to tear down the wall. Don't tear down the bearing wall. If the load-bearing wall must be coordinated with the property.

What procedures do I need to go through to decorate my house? If there is a property in the community, you need to apply to the property and file a decoration unit in the property. The person in charge of the renovation project submits a letter of commitment to the property. The owner pays the decoration deposit, cleaning fee and other expenses to the property. After these procedures are completed, the property will issue an access card to the decoration unit, and the construction personnel of the decoration unit will enter the community for construction.

What procedures do you need to go through for store decoration? Generally speaking, the renovation of residential shops is reported to the property management office, and the property management office will go through the formalities for you. You can decorate them by paying some fees, such as freight for slag removal construction.