I have lived in a house for more than a year, and the bathroom floor tiles are leaking. What should I do?

First of all, look at whether there are loose and porous tiles on the ground. If there is a hollow brick, drain the water in the gap before filling the joint. During the treatment, clean water should be added to the stirrer, and then the joint should be plugged and extruded while stirring until there is no powder block after stirring evenly. If the floor tile moves or deforms, base oil should be used instead of water to add into the blender and mix evenly. After mixing the materials, wait 10 minutes, and then mix them again before use. When repairing, you can fill the gap with a professional knife or scraper, and then press the caulking agent diagonally into the gap, leaving no blank. Then remove the overflow slurry obliquely, and don't take out the slurry in the gap. If there is excess mortar on the brick surface, clean the surface with a wet cloth to avoid affecting the appearance.

When solving the problem of upward seepage of bathroom floor tiles, attention should be paid to remedy. If the waterproof layer leaks, the tiles should be removed. It is best to confirm that the interior wall is the best, and then make waterproof floor tiles. If the water pipe is damaged, it needs to be pressurized to confirm whether there is water leakage, determine the specific location of water leakage, and replace the water pipe again. If the wall leaks because of the humid environment, in daily life, we should pay more attention to window ventilation and strengthen cleaning and finishing. If the cracks in the tiles are not handled properly and the ground leaks, you can find special construction personnel to clean up the cement-filled part and then carry out special waterproof treatment.

Polished tiles or whole-body tiles are recommended for the living room floor and wall, because of good wear resistance and easy cleaning. Polished tiles and whole-body tiles are recommended for the kitchen floor, because the kitchen uses water. In order to prevent water from splashing on the floor and slipping, wear-resistant and non-slip should be selected. The bathroom floor, like the kitchen, needs to be wear-resistant and non-slip. The kitchen has a large oil fume and a lot of oil stains, so it needs to be scrubbed frequently. Therefore, glazed tiles are selected for wall tiles, which have good oil resistance and wear resistance. Glazed tiles are recommended for bathroom walls. Brick surface needs to be moisture-proof, and the brightness should not be too high, so it can be matte. First of all, we should know what causes the leakage of bathroom floor tiles. There are several reasons: the bathroom is not waterproof; Secondly, the water pipe in the wall is damaged, resulting in water leakage; There is also rainy weather, because the air is humid, resulting in water on the surface of floor tiles; Finally, the cracks in the floor tiles are not good, and water seepage occurs.