The electricity meter paid the electricity bill and triggered the yellow light?

1, distinguish between leakage protection tripping and overload tripping. It can be seen from the tripped switch that there is a great possibility of electric leakage, which may be wires or electrical appliances. 2. When the electricity consumption is large, the grid voltage will rise, and the echo voltage of bad lines or appliances will rise and leak electricity. 3. If the microswitch starter is plugged into the power supply and not used, it will consume electricity and cause tripping. In the case of leakage protector, short circuit will also cause tripping to protect the power supply.

/

Suggested treatment:

1, household appliances or circuits have leakage or short circuit. Unplug all plugs and connect the power supply. Then plug them in one by one, and you can find them.

2. First, contact the property electrician to check the indoor short-circuit fault point, or call the power service hotline 95598, and the service personnel of the power supply company will assist in handling related faults;

3. Send it to the electric power department for inspection or replacement of new accessories in time.

4. It is possible that the license has been closed. Press and hold the wheel indicator button on the meter for more than 3 seconds to see if it will turn off.

The yellow light of the electric meter will be on all the time. Generally, electric meters have alarm thresholds, and when alarm conditions are triggered, they will give an alarm. The charge control meter in the State Grid area will not be opened immediately when the electricity fee runs out. Generally, an arrears threshold will be set, and a certain amount of arrears will be turned on. The yellow light is an alarm light, and the metering device is generally changed to intelligent charge control. When the amount of electricity meter is lower than a certain value, the alarm light will be on, and when the amount is used up, 30 yuan can be overdrawn.