What are the non-inspection items of Vanke?

Question 1: What is the significance of flight inspection in construction engineering? Construction project is the object of inspection, and flight inspection is the way of inspection, that is, the inspection team flies directly to the other party's construction site for inspection without informing the inspected unit or the inspected person, so that the other party is caught off guard, so as to achieve the purpose of checking the real level and situation, similar to the flight urine test of the International Olympic Committee.

Question 2: What are the specific items of Vanke's physical examination? 10 points are all to be checked, which is not strict, but only designated hospital newspaper staff to take them themselves.

Question 3: What are the items of Vanke's on-the-job physical examination? Assign the score of Harmony Hospital 10 to the routine physical examination items of Vanke General Hospital.

Reimbursement of company's entry medical examination expenses

If the m. e. doesn't have hepatitis B.

Basically, it means that the medical examination has passed.

Hemu Hospital, 936 Moganshan Road, Hangzhou

Question 4: What is the difference between Vanke's third-party evaluation and supervision? Is it different in qualifications or principals? Asking a senior expert to guide Vanke's third-party evaluation is to entrust a third-party consulting department to evaluate the details of the project according to certain services, quantify the work quality, standardized operation degree and entity quality of the supervision, construction and site management units in the process of project construction and implementation, and submit the evaluation results to the entrusting party, so as to reward and punish the evaluated party according to relevant contracts.

Therefore, the third-party evaluation only evaluates the work of all parties involved in the construction, but does not control it. Supervision is to control the quality, progress, investment and safety in the process of project implementation. The corresponding qualifications are different.

Question 5: Vanke's monthly flight inspection fee should be between 100-500 yuan. This is the demand for people. Some are cheap, some are expensive. You can mix them freely and then calculate the price. Prices fluctuate inside, depending on the place. Another is to look at the quality of the product and see if it suits you. Price is not the only measure.

Question 6: Introduction to the differences between Vanke and Evergrande 15 project management. During the period of Vanke project management, I have been thinking about the difference between Vanke project management and China Shipping Project management. There is a misunderstanding in Vanke's project management. On the one hand, project managers are troubled by a lot of routine work on site, and they have paid a lot of energy. Vanke's project managers generally report that they are more tired than other real estate project managers, but on the other hand, after a project is completed, the control of project quality and progress is often unsatisfactory, and the owners complain constantly, and their hard work is not recognized by the company and society. Why on earth is this abnormal phenomenon? I think every Vanke project manager needs it and it is worth pondering!

Personally, it is not that the quality of Vanke's project managers is worse than other real estate project managers. In all fairness, the quality of Vanke's project managers is mostly higher than that of other real estate project managers, which does not mean that Vanke's project managers are not responsible ... Why are these phenomena? In my opinion, it is mainly due to the project schedule requirements of Vanke and the high expectations of the owners for the quality of Vanke projects, which has brought great pressure to the project manager. In order to ensure that the results are controllable, the project manager is basically doing everything from major events to minor events, and the depth and span of the manager's management are too large to grasp the focus of the work; The engineering standard is not clear, or the requirements of the project department for the cooperative unit are not clearly output to the cooperative unit, and the requirements of the cooperative unit for Vanke are not clear; Due to the difference of corporate culture, the cooperative unit does not understand Vanke's customer concept and Vanke's engineering requirements; The quality assurance system of the cooperative unit is not perfect, and the performance ability of the cooperative unit needs to be improved, so it is difficult for the supervision unit to meet the requirements of Vanke project management.

Last year, Vanke Group put forward the development strategic goal for the next 10 year. Since then, the group has entered a period of great development, and the number of projects in first-line companies has risen sharply. Companies in Shanghai and Guangzhou have also begun to implement the large-scale project system, which requires higher project management. How does the project manager respond? It also needs the consideration of the project manager.

Transformation of Vanke Project Management Mode

I think Vanke's project management model should be fundamentally changed. Vanke's project management mode should be changed from the current project supervision mode to the resource integration mode of project operation, and the management span and depth of project managers must be appropriately reduced. On the one hand, the work focuses on the formulation of engineering standards and anti-cracking and anti-seepage systems, the disclosure and control of the quality of supervision work and the quality assurance system of the construction unit, and the inspection and supervision of the quality of supervision work will promote the improvement of the whole field work quality; On the other hand, as the person in charge of the project, we should make a fundamental change from the current single project management mode to the management of the whole project life cycle from the project planning stage to the project delivery. Mainly from the following aspects:

Formulate Vanke's engineering standards. First-line companies should adjust measures to local conditions, focus on formulating local engineering standards and anti-cracking and anti-leakage systems, guide the construction work of cooperative units, and provide reference for the formulation of the company's business objectives. This project standard includes project quality standard, time limit for a project standard and site environmental standard. At present, all branches are carrying out this work with different progress. The project management department of the Group demonstrates and guides the engineering standards and anti-crack and anti-seepage system of the first-line company, and determines the working standards. So as to solve the problem of what kind of products we need.

Establish strategic partnership with excellent social resources. During the whole development process, Vanke's project managers kept in communication with the cooperative units, made disclosure to the cooperative units, put forward requirements, and clearly conveyed to the cooperative units what products Vanke needed. Through communication, training and exchange, we will select suppliers who are capable and willing to cooperate with Vanke for a long time, eliminate cooperative units that cannot meet Vanke's requirements, and cultivate a number of long-term strategic partners to achieve the goal of mutual benefit. Before bidding, we should start this work, tell the bidder what Vanke's values and Vanke's quality standards, time limit for a project and construction environment standards are, and select the cooperative unit that agrees with and conforms to Vanke's values and standards through full communication; After the cooperative unit enters the site, actively organize the training and disclosure of the project personnel of the cooperative unit, export Vanke's project management concept and Vanke's quality standards, and let the backbone involved in Vanke's project development understand Vanke's requirements; In this process, strengthen effective communication between the two sides, discuss Vanke's standards, and feedback the application effect of Vanke's standards, so as to lay a good foundation for gradually improving and improving Vanke's standards.

In the whole project development process, the key points are >>

Question 7: Does Vanke need to check two and a half (five items of hepatitis B) for physical examination? Do you discriminate against hepatitis B carriers? Kindhearted friends, please answer! Thank you. The route of transmission of hepatitis B is through blood, mother and baby. * * * Food infection is very low, so it is expressly stipulated that physical examination only needs to check liver function, and hepatitis B does not need to be checked; It depends on the size of the company.

Question 8: Precautions for Vanke's house inspection What do you need to answer in Chen Jie?

First of all, the wall

1, check whether the wall is cracked.

2, check whether there is an empty drum on the wall, knock on the wall with a Xiao Mu hammer or other things, knock on the empty drum when the voice is not true, it is easy to hear. Mark it well and fill it with putty when decorating.

3. Check whether the putty on the wall is waterproof. You can bring a bottle of mineral water, splash water on the wall and touch it with your hands to see if there is mud on your hands. If not, it proves that the waterproof putty on the wall is qualified.

Second, the roof.

1. Check the roof for cracks.

2. Check whether the corner line of Yin and Yang on the roof and wall is horizontal. If not, in the future decoration, plaster gypsum should be used to find a lower level, and then water-resistant putty should be used for leveling.

Third, the ground.

1, check whether the ground is flat or not.

2. Check whether there are cracks and sand prevention: whether there are sand grains when rubbing the ground with your feet. This problem will occur if the mortar ratio or cement quality is unqualified and the mixing is uneven.

These aspects have played an obvious role. Details are important. There are many places that we can't see, otherwise there will be problems in the later decoration of furniture.

Fourth, doors and windows.

1, check the strength of doors and windows.

2, check the function of the window

A. The doors and windows shall be pushed and pulled smoothly, with smooth surface, no serious scratches, and no cracking or damage of profiles.

B. Hardware accessories: complete, correct and firm.

C sealing quality: when the doors and windows are closed, there is no obvious gap between the fan and the frame, and the sealing strip is not loose, falling off and exposed.

D. Door window frame, vertical fan, without bending.

E. The glass shall be free from pollution and damage, the double glass interlayer shall be dust-free and moisture-free, and the partition shall be flat.

F. whether the window drain hole has been opened. Dead water will flow into the profile.

Verb (abbreviation of verb) circuit

1, check whether the socket and switch settings are reasonable and whether the circuit needs to be modified during decoration. First, look at personal needs. Second, it depends on whether the socket and switch settings at home are reasonable and convenient.

2. Check whether each light switch and power socket can be used normally. You can use a mobile phone charger or an electric pen to check whether the power socket is electrified. Of course, professionals will use special sockets to check.

Six, waterway

Waterways are mainly embodied in kitchens and bathrooms. Toilets generally have two floor drains, a toilet drain, a bathtub drain and a washbasin drain. See if the setting is reasonable, and then decide whether it can be changed according to the needs of your own decoration, but the specific transformation plan depends on the opinions of experts.

The most common problem is that many people want to change the sewer pipe of the toilet, thus gaining more space. However, the renovation of the sewer pipe in the bathroom needs to be carried out in the sewer pipe at the top of the downstairs, which is easy to cause a lot of trouble. In order to prevent future problems, it is difficult for the owner downstairs to agree to this change, so it is not recommended to change it without authorization (the practice of raising the ground will easily lead to poor drainage), and it is necessary to listen to the opinions of professionals.

Seven, gas pipeline

The gas meter is a very small thing and takes up a lot of space. How to adjust the position of this instrument depends on the opinions of professionals. It is very important that it must be reformed by the gas company.

Eight, waterproof test

Waterproofing here refers to the waterproofing of kitchens and bathrooms. Of course, some of the houses currently delivered have been declared in advance to be waterproof and need to be renovated. If it is waterproof when it is delivered, then we need to verify whether it is waterproof. If you don't try it before the renovation, then if you find water leakage after the renovation, then the maintenance project will be big. You have to tear down the newly decorated floor to make a new waterproof layer.

The waterproof acceptance method is: use cement mortar as bottom beam to block the toilet door, then cover the sewage/water outlet with plastic bag, then wrap it up, and then drain the water in the toilet, with a shallow depth (more than 2cm). Then make an appointment with the person in charge of the property downstairs to check whether there is smallpox in their toilet after 24 hours.

Nine, pipeline inspection

The pipes mentioned here refer to drainage/sewage pipes. Especially seven is the balcony and other sewage outlets. At the time of acceptance, take a water container in advance and then pour the water into the sewage outlet. See if the water flows smoothly. Why do you accept this? Because in the process of construction, some workers often "steal" this job when cleaning. Pour some cement residue into the drain pipe and drain it away. If the cement is sticky, it will block at the elbow, which will make drainage difficult. There is another situation, but only >>