10 years ago, when the house was renovated, the bathroom was squatting and there was no other water. How to solve it now?

For the old house more than 10 years ago, the toilet was squatting when it was renovated, and it was more troublesome to reinstall the toilet. Because the waterproof problem of this old house is very bad, so for the second decoration of the old house, all the ground must be planed off.

You can also push the exposed pipe on the roof up 30 cm. Now many plumbers have this technology. The reason for this is that you can upgrade the bathroom space for later use without feeling depressed.

The reason why the ground is also planed is to be waterproof. If the waterproofing is not done well, you will be responsible for any impact caused by the later use on the downstairs, so since you are ready to renovate, you should deal with it in all directions. Of course, waterproof is very important, not only on the ground, but also on the wall at a distance of 40 cm to 60 cm. Waterproof, of course, can be directly installed in the original sewer toilet.

However, the position of the sewer cannot be changed. If you use a place, there will often be congestion problems in the later stage. In fact, there are many places in the decoration process that we can't change. 1 point is the main sewer crossing, and the second point is the main natural gas pipeline. Of course, if many people change the position of the stove, they will extend the natural gas pipeline, but they have not changed the main pipeline.

Even these small changes need to be called to the gas company, and there are special change personnel to pay for the door-to-door service to make changes. In addition, the most important thing is that the load-bearing wall must not be touched. I think the property management company will also communicate with the owners before the renovation.