Can I disassemble the water meter by myself?

When the water meter is installed, the heat-shrinkable film is fixed at both ends of the water meter to avoid inaccurate water flow measurement and stealing water caused by unauthorized disassembly and assembly of the water meter by individuals. At the same time, the water meter has anti-crack and anti-theft function, and it has counting function every time it is disassembled, so it can be seen at a glance when it returns to the factory for maintenance.

It is suggested that the majority of water meter users should contact the property or water meter manufacturers and other relevant departments directly to avoid unnecessary troubles caused by unauthorized disassembly.

Extended data:

Matters needing attention in the use of water meter:

1. When selecting the caliber of water meter, we should not only consider the pipe diameter at the installation site, but also consider the frequently used flow rate to select the appropriate caliber water meter. It is recommended to use the common flow close to or less than the flow required by the water meter.

2. The installation position of the water meter should be convenient for disassembly and meter reading, and should prevent exposure, freezing and pollution. At the same time, a valve should be installed in front of the water meter so as to disassemble the water meter without water.

3. When installing, remove impurities such as hemp and ore. From the pipeline, to prevent the filter from blocking, otherwise it will increase the word value error and affect the water supply.

4. The water meter should be installed horizontally (except vertical water meter), with the dial facing upwards, and the direction of the arrow on the case should be consistent with the direction of water flow.

Baidu encyclopedia-water meter