Matters needing attention in plant decoration

The detail that should be paid attention to in workshop decoration is to evaluate the floor, because the floor must be kept flat in workshop decoration, and if it is not flat, it will have a certain impact on future workshops.

Ground evaluation

If there is any unevenness, 1:3 cement mortar can be paved in time or cement can be directly used for gravity flow.

Slot size

Be sure to pay attention to the width and depth of trunking. If the size is insufficient, the ground behind the trunking will be uneven, resulting in reverse operation.

Farr code

According to the fire code, an independent smoke detector must be installed, and a professional factory decoration company must be invited to do fire fighting. Usually the maintenance unit of the building. If you don't change this detail and the second detail, you can't pass the property acceptance.

Network cabling

In the renovation of the factory building, the network wiring must pass through pipes, and steel pipes must be used instead of PUC pipes commonly used at home. The junction box must also be made of iron (sometimes PUC can be used).

fire resistance requirement

In the decoration of modern factory buildings, there are certain standards for fire prevention. The workshop should have a suspended ceiling, and the sprinklers in the workshop must leak a certain size from the suspended ceiling and keep it level.