The heating is not hot. Looking for a property or a heating company?

1, contact the property management company first. Under normal circumstances, the reason why there is no heating in citizens' homes or the temperature is not up to standard is often in the community. Air leakage of heat exchange equipment in heat exchange station, failure to turn on heat exchange equipment, aging of residential pipe network, blockage of building pipe network, blockage of household filter screen, and unauthorized heating are all common reasons for not heating or unqualified room temperature. Therefore, after the owners encounter heating problems, they should first contact the residential property company.

2. If the property management company can't solve it, contact the heating company. According to Article 51 of the Property Management Regulations, water supply, power supply, gas supply, heating, communication, cable TV and other units shall be responsible for the maintenance and conservation of relevant pipelines and facilities within the property management area according to law.

What is the reason why the heating is not hot?

1, air jam

Through observation, it is found that the temperature of some radiators in the home is low, mainly because the existence of air hinders the circulation of hot water. Therefore, the user only needs to open the exhaust valve at one end of the radiator to exhaust the air inside. If water comes out, it means that the air has been discharged. Tighten the exhaust valve at this time, and it can be used normally.

2, the pressure is not enough

If the method in the first case doesn't work, it may be that the pressure in the heating pipe is not enough, which leads to the ineffective circulation of hot water. At this time, you can find a heating company to add a booster pump to make the hot water fully circulate and achieve the effect of full heating.

3. The pipeline is in the wrong direction

Another possibility is that the pipes of the radiator run in the opposite direction, and there is no automatic convection between hot water and cold water, resulting in the heating is not hot. This kind of problem requires changing pipes up and down.

4. The filter valve is clogged with impurities.

Often the heater is used for a long time, and the filter valve on the hot water pipeline leading to the home will gather impurities, so that the hot water can not flow into the room smoothly and can not be fully distributed, so that the radiator at home is not hot enough. For this reason, users can only seek after-sales service and let professionals solve it.