What are the precautions for plant decoration?

Workshop decoration is different from ordinary family decoration, with large workshop area, long decoration cycle and different decoration steps and priorities.

Matters needing attention in plant decoration

1. Is the layout design of the factory building reasonable?

We know that the workshop area is generally large, and the layout design process of functional areas, such as fire exits and ventilation, is demanding, because good ventilation is the key to ensure the production environment of the workshop. Therefore, in the design process, the corresponding functional areas should be set according to the production line and demand, and the layout should be safe, convenient and fast. ?

2, the choice of ground decoration materials?

The floor in the workshop is very important because there is a lot of wear and tear every day, so try to choose durable materials. At present, epoxy floor paint is mostly used for the treatment of workshop floors, and anti-static floors need to be used in some places; In the process of decoration, we must make a reasonable plan for the workshop space and deal with the corresponding ground according to the specific needs. ?

3. Top material?

Ceiling construction should choose economical, low ignition point and convenient construction materials; In this way, it will be more convenient for us to dismantle the factory when we decorate later. The commonly used materials for factory ceiling are mineral wool sound-absorbing board and calcium silicate board. ?

No matter what kind of material is used as the top material, it needs to cooperate with the fire fighting facilities. Usually, the ceiling keel is made first, and then the pipeline facilities for spraying and smoke sensing are installed in the fire fighting project. After all ceiling materials are capped, spray nozzles and smoke detectors shall be installed in the fire fighting facilities. ?

4, the choice of partition?

In the process of decoration, some areas should be reasonably divided into different functional areas, so it is necessary to divide them with partitions of different materials. These divisions can play the role of division, but represent different styles. ?

5. Fire control approval?

For the sake of safety, we can't ignore the installation of fire fighting equipment. Before installing fire-fighting facilities, we need to go to the local fire station for approval, and after the project is completed, we need to report it for approval. Generally, it takes about 10 days to complete the fire control examination and approval procedures, so it is necessary to consult the fire control company on this project before decoration. ?

Four main points of factory building decoration?

1, is it safe?

First and foremost, the most important thing in factory decoration is safety: no matter what factory is opened or renovated, safety is in the position of 1. In the decoration of many factories, we need to get through some places to ensure that there is enough space for equipment in the workshop. At this time, it is necessary to pay attention not to destroy the load-bearing structure and building structure of the house; Moreover, because the decoration area of the factory building is large and the materials are unified, the use of materials must be environmentally friendly to prevent decoration pollution; In addition, there are generally more electrical equipment and electricity in the plant, so for hydropower materials and hydropower construction projects, the decoration of the plant is one or two grades higher than that of the construction industry; In a word, the safety factor of the factory building is far greater than other construction projects. ?

2. practicality?

In the design of plant decoration, it is necessary to meet the use function of plants to the maximum extent. Any plant decoration loses its function and its meaning of existence. Therefore, we need to deal with the functional design of different plants in more detail. A good plant decoration does not conform to the regulations. As a decoration company, we also pursue customers' better sense of use. ?

3. Economy?

As a decoration company, we need to use as little money as possible to achieve satisfactory factory decoration effect when designing and decorating, which is the economic principle of tooling. Such economic considerations usually have an impact on the beautiful decoration of our factory building, but as a decoration designer, we must solve such problems and fully consider the cost performance and reasonable collocation in the scheme. Provide customers with quality and preferential solutions. ?

4. Beauty?

The beauty of the factory building is also a place that a qualified decoration company needs to consider when decorating. The aesthetic principle of workshop is artistry. In other words, it is necessary to satisfy both your personal aesthetic needs and the public's aesthetics. A beautiful factory can also enhance the goodwill of the corresponding cooperative customers of the factory to the products produced by the factory.