Excuse me, how to install the door suction for the security door?

First, it is not recommended to install door suction in general security doors. A security door doesn't need to be opened often. Second, it is not practical to install the door suction for security doors.

Two, buy door suction must consider three factors, namely brand, material and applicability:

1, brand: There are countless brands in the building materials market now, and it is inevitable to struggle with brand selection. When choosing, it is best to choose products with high reputation. This product has at least one brand guarantee, so don't buy products without three things.

2. Material: It is best to choose stainless steel as the material of the door suction, because the door suction made of stainless steel is durable and not easy to deform, and you should also pay attention to the appearance characteristics of the door suction when choosing it, so as to make craft lights.

3. Applicability: Door suction is mainly divided into wall suction and ground suction. These two kinds can be selected according to the situation at home, but the other kind of wall suction will affect the skirting line during installation. At this time, you should choose ground suction.

Third, install the door suction:

Door suction is divided into wall suction and ground suction, and the installation environment must be considered when installing.

1, test whether the door suction and the position of the door are appropriate, and it is best to test and compare them repeatedly;

2. After the position of the suction door is determined, position the door, floor tile or wall with a pencil respectively;

3. The next work is to drill the installation hole of the door suction on the ground or wall with a big electric drill;

4. Install the fixed end of the door suction port. The fixed end needs to be tightened before installation, and then fixed on the ground or wall with the attached internal angle wrench;

It is a delicate job to install the door suction on the ground. After determining the position, punching and assembly procedures, install the fixed end on the ground. Tighten the screw at the fixed end with the included internal corner tool, and the door suction will be installed automatically.

6. It is useless to install the door suction fixed end, and the door should also be installed. Just tighten the door and you can find the exact position.

7. After installation, make fine adjustment, rotate the suction angle of the revolving door to make it completely fit the suction of the door, and finally tighten the screws thoroughly.

Source: Network

Note: Invasion and deletion