Nippon wall waterproof latex paint wall painting steps and quotation

As a large paint manufacturer in the Asia-Pacific region, Nippon has a wide range of business, including architectural coatings, automotive coatings, industrial coatings, powder coatings, etc., which can be said to be the leader in the industry. This paper will introduce the painting steps and quotation of Nippon wall waterproof latex paint to help readers better understand the product.

Buy suitable painting tools and brushes.

Step 1: First, buy suitable painting tools and brushes. High-quality tools can be coated with a thick coating, which can cover the original background color and ensure the durability of the paint film. You can rub it repeatedly.

Fill in the seams and smooth them.

Step 2: Before painting latex paint, caulk and level. Clean the wall or glass with special cleaner or water, and then dry it to remove dust or dirt on the wall. If there are nails and other holes in the wall, please fill them with putty.

Adjust latex paint with water

Step 3, adjust the latex paint with water, and generally control the proportion of water in roll coating at 20% ~ 30% (volume ratio). If there is too much water, latex paint may go bad.

Mix the paint and water evenly.

Step 4, evenly stir the paint and water, and then let it stand for 20 minutes to achieve the purpose of defoaming, so as to prevent small holes or bubbles from appearing after the wall surface is painted with latex paint.

pigment

Step five. The break time is over. You have to draw it. Then, wet your tools with water. For example, wool brushes and rollers with negative angles are soaked in water and then immersed in water. Then draw it.

Choose good quality paint.

Step 6, prepare latex paint according to the standard method. Paint should not be sloppy, otherwise it will be useless. Be sure to choose good quality paint to paint, and paint the wall step by step according to specific steps.

cite

Quotation for raw materials of waterproof latex paint for wall surface: Generally, it is three yuan once, and generally one bottom and two sides are polished by four processes 12 yuan, but usually the foreman will pump water when handing it over to our workers. If it is a decoration company, it should also be included in the decoration company's pumping. If it is a property designated decoration company, add. So you can measure it by 12 yuan. Too many instructions are subcontracted, and too few instructions are destined to cut corners.