Home improvement terrazzo floor cleaning, how to renovate terrazzo floor?

Home improvement terrazzo floor cleaning, how to renovate terrazzo floor?

Home improvement terrazzo floor cleaning, terrazzo floor how to renovate. Terrazzo is a composite floor material with cement as the main raw material, with low cost and good performance. The biggest advantage of terrazzo floor is moisture-proof, but terrazzo is weathered and aged quickly, and its service life is 2-4 years. The silicon millstone floor built by terrazzo is an improved product of traditional terrazzo floor, and its crystal face effect can be comparable to that of natural marble without special care. The surface smoothness of silicon grindstone made of terrazzo is high, which is equivalent to the surface quality of imported middle and high-grade marble. The surface hardness of terrazzo building silicon grindstone is close to that of high-hardness granite, with good wear resistance and long service life, which greatly reduces the maintenance and cleaning cost of the ground and the difficulty of sanitary management.

The following introduces the cleaning of terrazzo floor in home decoration and how to renovate terrazzo floor.

First, the terrazzo floor is clean.

1. Remove movable items from the clean area. Use materials such as adhesive tape or plastic sheets to protect waterproof and possibly damaged items.

2. Shovel the stubborn dirt on the ground with a shovel and a ground treatment cleaner, such as Weijie A603 cement stain acidizing cleaner and Weijie B604 super oil stain cleaner.

3. Add the ultra-clean R-50 floor cleaner into the water tank of the sweeper in proportion, and use a brush (for uneven ground such as rubble and grooved floor tiles) (for flat ground such as marble, granite and plastic, choose a black or red brush according to the hardness of terrazzo).

4. After cleaning the floor with an appropriate area, suck the dirty water off the floor with a water suction machine. In order to prevent the water suction machine from generating too much foam, it is suggested to add a little Weijie N407 defoamer to the sewage bucket of the water suction machine to avoid foam damage to the water suction motor.

5. It is recommended to clean with clean water, especially the dirty ground.

6, used to mop the floor and dry the water stains left on the ground.

Second, the terrazzo floor renovation construction process

Rough grinding: use terrazzo refurbished machine to polish the old terrazzo floor, remove oil stains and empty layers on the surface, and eliminate unevenness and potholes on the floor.

Fine grinding. Use terrazzo refurbished machine, ground grinder and metal grinding wheel to polish rough ground, so as to eliminate the traces of rough grinding, and at the same time polish the excessively high ground to improve the flatness of the ground.

Repair. Fill and repair potholes, cracks (slotting as appropriate) and depressions on the ground with terrazzo floor repair mortar. Ground grinding. Use terrazzo, sander and terrazzo grinding pieces to further polish the ground from coarse to fine until it meets the actual requirements.

Before using terrazzo floor renovation treatment agent, the floor must be treated. First, the ground sundries are cleaned and repaired, and then the grinding process is carried out, so that the ground is polished flat and shiny, and the weathered layer and stains with low surface strength are removed, so as to prepare for the construction of terrazzo floor renovation treatment agent.

A, according to the construction area division of reasonable construction period, and then clear the need for construction area. Considering that the factory can't stop working, the construction should be carried out in strict accordance with the construction flow section, and the next process can be carried out in the cleared area.

B terrazzo floor with serious ground damage must be cut, repaired and polished in advance. The repair material is stone and color close to the old terrazzo, and it reaches the same level as the old terrazzo after polishing.

The terrazzo floor used for many years will be weathered and blackened, and some stones will fall off. How to solve this situation? Knock it down and do it again, which is time-consuming, laborious and expensive. Leaving it alone will affect the appearance. In order to make your floor look brand-new, the simple steps are as follows:

First solve the big hole (not the small hole where the stone falls), and see how the big stone and color are used on the ground, whether it is black cement or white cement. After selecting the materials, stir and fill the holes with a certain proportion of cement stone, the filling height should be slightly higher than the ground, and wait for drying. For the hole where the pebbles fall off, repair it with resin glue, without going into details. After all the holes are repaired and dried, the next work is to polish them as a whole. After polishing, the ground will be completely new.

General operation flow of terrazzo renovation: waxing and polishing. Terrazzo is a natural and environmentally friendly decorative material with bright colors and luxurious style, so its maintenance is particularly important. Waxing is to seal some invisible holes on the surface of terrazzo to prevent dust pollution and stain penetration, thus prolonging its service life.

1, clean the floor, use a multifunctional floor washer, with cleaning tools and chemicals such as a vacuum cleaner and stone washing.

2. Waxing: Waxing terrazzo with professional waxing machine and advanced terrazzo care wax.

3, polishing, polishing with a high-speed polishing machine to achieve a smooth and bright effect.

After several years of use, the surface of terrazzo will age, which will seriously affect the appearance. The crystal surface hardening treatment is to grind the terrazzo with an abrasive, so that the chemical reagent reacts with the calcium component in the terrazzo, forming a new layer of crystalline substance on the surface of the terrazzo, preventing stains from infiltrating into the inner layer of the terrazzo, enhancing the wear resistance, and making the terrazzo refract natural luster to achieve a certain hardness and brightness. The surface hardening treatment of terrazzo crystals requires the use of terrazzo curing agent and terrazzo curing agent.

The above is all about terrazzo floor cleaning and how to renovate terrazzo floor. Treatment of terrazzo lesions: The main lesions of terrazzo are those caused by colored stains such as oil stains, water stains and coffee stains infiltrating into terrazzo. The treatment of its lesions is to use professional and imported drugs to remove stains, so that terrazzo can be restored to its original color and renovated. The terrazzo with uneven surface, deep scratches, deep stains and other polluted or diseased terrazzo is treated from coarse to fine by imported terrazzo refurbished machine and multiple sets of different millstones.