How to check and accept hardcover rooms? Where should we focus on?

The introduction of finely decorated houses has helped the owners to save the time-consuming and laborious process of decoration, which is quite popular with people. But if you choose a well-decorated house, there is no need to fully consider the quality of decoration. There is also an acceptance process for the collection of finely decorated houses. Now refined decoration houses are becoming more and more popular, and many real estate companies are more popular in decoration and have launched this type of house. The introduction of finely decorated houses has helped the owners to save the time-consuming and laborious process of decoration, which is quite popular with people. But if you choose a well-decorated house, there is no need to fully consider the quality of decoration. There is also an acceptance process for the collection of finely decorated houses.

A, check whether there is any quality problem on the wall.

Look at the quality of latex paint, whether it is flat, whether there are cracks, broken edges and rough problems; Check whether there is water stain on the wall, and whether there is crack at the junction between balcony and room.

When the kitchen and bathroom tiles are laid on the top, it is necessary to check whether there are bumps in the four corners (the four corners of the roof and the four corners of the ground), and whether the tiles and wall tiles are deformed, cracked and sunken. You can hit the floor tiles and wall tiles with a small hammer. If there is a hollow sound, you should ask the developer to arrange repaving.

Second, check the ceiling installation.

On the one hand, the existence of suspended ceiling plays a beautification role, on the other hand, it also has potential crisis. The weight of the ceiling itself increases the pressure on the wall. If the construction workers are lazy in the decoration process and fail to combine the ceiling with the floor and the keel with the decorative board, the ceiling is in danger of falling off the roof at any time. So be sure to test the safety of the ceiling.

Third, check whether there is a problem with the circuit.

Circuit refers to the location and matching of sockets, the model of wires and the capacity of large power-consuming equipment. This requires the owner to ask the property management company or developer of the community for the completed drawings of the basic layout of concealed works such as water and electricity. In this way, in the future use process, if there is a short circuit, water cut, etc., it can be repaired by professionals according to the drawings.

In addition, pay attention to observe whether the leakage protection switch of distribution box is on; Ordinary socket, high-power socket, etc. There is a clear shunt, which depends on whether the panel switch is installed smoothly and whether the switch is effective.

Fourth, check whether the doors and windows are damaged.

Switch the safety door several times to see if it is flexible. Close the door and listen to the sound insulation effect. See if the cat's eye is crooked, whether the doorbell is normal, whether the door can be closed tightly, grab the door frame with both hands and shake it hard to see if the door frame is shaking.

It also depends on whether the switch of the window is flexible, scratched and damaged. Whether it can be sealed tightly, isolated from the wind, deformed, consistent with the wall, normal lock, flexible lock and intact glass.

Five, air quality testing

Because the house is finely decorated and the interior decoration materials are purchased by the developers, the buyers cannot control the quality of the materials. If the air quality of the renovated room is not up to standard, it is a health risk to the owners who live in it. Therefore, when inspecting a house, the first thing to check is the indoor air quality.

It should be noted that developers will generally provide the agency's indoor environment test report. When reading the report, do you want to pay attention? CMA？ The logo, with? CMA？ The report is the test report of the testing organization recognized by the state, otherwise it will be invalid.

Six, check whether the water flow is smooth.

Fill the basin with water, fill each sewer with water, and fill each sewer with about two basins of water to see if the sewer drains quickly and smoothly.

In the days when the house is closed, the owner can initially check whether there is any problem with the house. If there is a problem, the developer must rectify it first. Don't sign the owner's house acceptance form first, and then ask the professional house inspector to inspect the house after the peak period of acceptance is staggered. In fact, there are many points that need to be paid attention to in a comprehensive house inspection, such as circuits, gas, pipelines and public environment. Find the problem and go to the property to solve it in time.