Installation protocol

In study, work and life, protocols are used more and more widely. After signing the agreement, there are laws to follow and evidence to check. So how to write the relevant agreement? The following are six installation agreements that I have compiled for you, for reference only. Welcome to reading.

Installation Agreement 1 Party A: (Owner)

Party B: (Contractor)

On the basis of equality, voluntariness and consensus, and on the principle of mutual trust, Party A and Party B have reached the following agreement on the hydropower project of Party A..

Article 1: Project overview 1. Project location: Goumen Village, Liqu Town, Baota District, Yan 'an City. 2. Project contracting mode: the contractor undertakes the cleaning work, and the materials are purchased by Party A. 3. The construction period is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Article 2: Material Supply Agreement 1. The materials supplied by Party A in this project shall be qualified products that meet the requirements and delivered to the site on time. Party B shall go through the acceptance formalities. If there is any quality problem or specification difference, Party B shall promptly raise it with Party A, and Party A shall replace it in time. 2. The decorative materials supplied by Party A shall be used in this project, and shall not be used for other purposes without Party A's consent. If Party B violates this regulation, Party B shall pay Party A double the material fee.

Article 3: Agreement on Project Quality and Acceptance 1. This project strictly implements GB-20xx, the national Code for Construction of Residential Decoration Engineering, and GB-20xx, the Code for Quality Acceptance of Building Decoration Engineering, and refers to other local standards and quality evaluation and acceptance standards. 2. If quality problems are caused by Party B's own reasons, such as poor technology and weak sense of responsibility, Party B shall bear the cost of rework and materials. 3. Project completion: Party B shall notify Party A of the acceptance in advance and go through the acceptance procedures. 4. The construction scheme of this project is designed by Party A. ..

Article 4: Site Management Agreement on Fire Prevention in Work Safety 1. Strictly abide by the stipulated decoration construction time, reduce construction noise and reduce environmental pollution. 2. Without the consent of Party A and the approval of relevant departments, the original building structure and various equipment and pipelines shall not be dismantled and changed at will during construction. 3. Ensure that the decoration site is clean and tidy, and do a good job of cleaning and handling before completion. 4. Party B shall cooperate with Party A to keep the construction materials and prohibit other personnel from entering the site. 5. Without Party A's permission, Party B shall not take any decoration materials provided by Party A out of the house. In case of theft, Party B shall pay double indemnity according to the material price. 6. During the construction period, Party B's personnel are not allowed to smoke near wires, cables and flammable materials, otherwise 500 yuan will be fined. ,

Article 5: The payment method, contract content and settlement agreement of this project are 1, and the construction personnel will pay 20xx yuan within 10 days. After the completion of the circuit, 95% of the project payment will be paid after the overall completion acceptance and delivery. 2. The warranty period of this project is 2 years, and 5% of the project payment is the project warranty fund. The warranty period is calculated from the date of signing the completion acceptance. 3. Receipts shall be issued for the capital transactions between the two parties. 4. Project settlement method: the building area is _ _ _ _ square meters. 5. Party B's contracted contents: 1, line slotting, wiring, threading and trench burying; 2, all the garbage in the process of electrical construction site classification and bagging; 3, circuit construction wall, drilling, cutting; 4, switch socket panel installation; 5. Hardware installation; 6. Installation of lamps and lanterns in the later period (crystal lamps are counted separately); 7. Other charging items shall be calculated separately. Article 6: In case of any dispute over the quality of the project, both parties shall settle it through consultation. If the parties are unwilling to negotiate or mediate, or if negotiation or mediation fails, they may bring a lawsuit to the people's court in accordance with the provisions of this contract.

Article 7: Modification and dissolution of the contract 1. After this contract is signed by both parties, both parties must strictly abide by it. If either party needs to change the contents of the contract, it shall sign a supplementary agreement after consultation. Before the signing of the contract, if one party wants to terminate the contract, it should put forward in writing, pay liquidated damages at% of the total contract price, and go through the termination procedures. 2. In the process of construction, if either party promises to terminate the contract, it shall give a written notice to the other party, and both parties agree to go through liquidation procedures, conclude a termination agreement and terminate the contract.

Article 8: Other agreements 1. If the construction period is delayed due to force majeure or unforeseeable factors such as weather and power failure, it can be postponed after confirmation by both parties. 2. Before entering the site, Party A may require Party B to cooperate with other types of work for cross construction at the site. 3. During the warranty period, Party B shall repair the quality problems caused by Party B's construction equipment free of charge and must arrive at the site within 48 hours after receiving the notice from Party A.. In case of problems caused by Party A's improper use or force majeure, quality objection of main materials and products purchased by Party A, or unforeseen reasons, Party A shall pay the maintenance fee to Party B according to the actual cost.

Article 9: Supplementary Provisions 1. This contract shall come into effect after being signed (sealed) by both parties, and shall be terminated after the performance of the contract. 2. After this contract is signed, the project shall not be subcontracted. 3. This contract is made in duplicate, with each party holding one copy. 4. This contract is valid until _ _ _ _ _. 5. The warranty period of this project is 2 years. After the warranty period, Party B shall pay Party A the corresponding maintenance expenses. ..

Party A's signature (seal) and Party B's signature (seal)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Chapter II of Installation Agreement Party A:

Party B: Hunan Cable Shaodong Network Co., Ltd.

Based on the principles of voluntariness, fairness, honesty and trustworthiness, Party A and Party B have reached the following agreement on broadband installation and management through friendly negotiation:

1. Party A agrees to use only broadband services provided by Party B in its development area, and the number of users shall not be less than that of cooperative suppliers.

2. Party A agrees to provide Party B with the installation locations of communication pipes and communication equipment. The pipelines, optical cables and equipment outside the building are invested and constructed by Party B, and the property rights belong to Party B. Party A is responsible for the cooperation and coordination during the construction period, and no other party has the right to use them without the permission of property rights.

3. After the agreement is signed, the broadband business and expenses in Party A's area shall be handled by the customer service manager designated by Party B, and Party A and the property management department shall provide necessary assistance and support. Party B regards Party A as a big customer and promises to provide high-quality and convenient services to all businesses (individuals or units) of Party A. ..

4. The preferential policy of Party B's broadband service gives priority to Party A's family according to the preferential policy of Party B at that time.

5. After the agreement is signed, Party B shall complete the construction task as planned according to the time schedule agreed by both parties, so as to ensure that Party A can use Party B's business in time.

6. If one party breaches the contract, the responsible party shall pay 65,438+00% of the investment amount to the other party as liquidated damages, and compensate the losses caused thereby.

7. Other matters not covered shall be settled by both parties through friendly negotiation.

8. This Agreement is made in duplicate, one for each party, and each copy has the same legal effect.

Party A:

On behalf of:

Stamps:

Party B:

On behalf of:

Seal: Year Month Day

Article 3 of the Installation Agreement: Employer (Party A): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Installation contractor (Party B): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In order to clarify the rights and obligations of Party A and Party B in the construction process, urge both parties to create conditions for each other, do a good job in cooperation, and complete the project tasks on time with good quality and quantity, this contract is hereby signed through full consultation between both parties for joint compliance.

1. Construction site: dormitory for senior high school students.

2. Construction scope: The total installation area of this contract project is about _ _ _ _ _ _ square meters.

3. Contracting method: Party B contracts the window safety net on the first floor of the dormitory, and Party A only provides the steel required for welding the safety net on the second and third floors.

4. Project cost: subject to the same measurement by both parties, the first floor is RMB/m2, and the second and third floors are RMB/m2.

Total RMB yuan

5. Contract term: Commencement date: YY; Completion date: YY.

6. Quality standard: it is required to meet the local quality inspection and evaluation standards of the same industry.

7. Person in charge of the project: Party A appoints _ _ _ _ _ _ _ _ as the person in charge of the on-site construction to supervise the progress and quality of the project, inspect the concealed works, and handle the intermediate handover acceptance procedures.

8. Safety responsibility: Party B shall use trained installers to carry out the construction according to the construction technical specifications and quality acceptance specifications. Party B shall be responsible for the industrial accidents during the construction and the losses caused by Party B's poor management and improper use of materials. During the construction period, the construction personnel shall not damage or lose the school property.

9. Quality acceptance: the metal body is required to be straight, with the left-right spacing not exceeding 10cm, and at least four steel bars in the middle of the upper and lower parts; The material specification shall meet the requirements of steel with a diameter of 12cm. The solder joints of the anti-theft network management body are firm without looseness, and there should be two firm fixing points on each side of the network. The inner layer shall be derusted before being coated with antirust paint, and the paint film on the outer surface shall be uniform and consistent in color, and there shall be no defects such as falling off and showing the bottom.

10. project payment settlement: after the settlement is verified by Party A's acceptance and completion,% of the settlement amount will be paid, and the remaining% will be used as quality guarantee. If there is no quality problem within months after the project acceptance, Party B will settle the balance of the contract.

1 1. liquidated damages: RMB for every day of delay in the construction period; If the quality acceptance fails to meet the agreed standards, a fine of% will be imposed;

Twelve. Number of copies of the contract and validity period: this contract is in duplicate. Party A and Party B each hold two copies; Submit to the relevant departments for the record. This contract shall come into effect as of the date of signature by both parties.

Party A (seal) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: (Seal) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

XX year month day

Article 4 of the Installation Agreement Party A: Zhujiatan Primary School

Party B: (Chunhui Fabrics) Wang Baolin

Based on the principles of equality, voluntariness, fairness, honesty and credit, Party A and Party B make and install curtains for office buildings, dormitory buildings, conference rooms, etc. In order to ensure the interests of both parties, this contract is formulated through consultation.

First, the project content:

1. Quantity: * * 62 curtains.

2. Curtain specifications: height 2.2m, width 2. 1m (office and conference room), height 2m, width 2. 1m (dormitory).

3. Pricing of each curtain: ** 12 for office and meeting room ***50 for 260 yuan dormitory * * 187 yuan each.

2. Production requirements: Party B shall provide curtain samples and install them according to the samples specified by Party A, and the size shall be subject to the window. Requirements to ensure quality, beautiful, durable, easy to use.

Three. Total project price: twelve thousand four hundred and seventy yuan only (12470 yuan).

4. Payment method: bank transfer (Party B provides the bank account number)

5. The warranty period is one year. The warranty scope includes the firmness of curtain installation, except the damage caused by Party A's abnormal use .. On call during the warranty period.

6. This contract is made in duplicate, with each party holding one copy.

This contract shall come into effect after being signed and sealed by Party A and Party B, and shall automatically become invalid after all the contents agreed in this contract are finalized.

Party A: Party B:

20xx 165438+ October 20th

Article 5 of Party A's Installation Agreement:

Party B:

After friendly negotiation, Party A and Party B sign the following agreement on the principle of equality and voluntariness.

I. Signing method:

2. Party A entrusts Party B to install the crane. The specific specifications are as follows: The general contracting fee is:

3. Party B shall carry out the installation according to the relevant industry standards, and Party B shall be responsible for any accident during the construction.

4. Large tools such as electric welding machine and oxygen shall be provided by Party A and kept by Party B during use.

5. Party A shall provide all materials in the installation process in time. If the materials are not in place, the expenses will be calculated per person per day.

6. After the crane is installed, Party A shall pay the full amount in one lump sum.

This agreement is made in duplicate and will come into effect after being signed by both parties.

Representative of Party A: Representative of Party B:

Tel: Tel:

Article 6 of the Installation Agreement Buyer: (hereinafter referred to as Party A)

Seller: (hereinafter referred to as Party B)

Party A and Party B had a serious negotiation on the purchase of curtains by Party A, and both parties agreed to conclude a transaction according to this contract. During the execution of the contract, both parties shall strictly abide by the relevant provisions of this contract. In case of any objection during the execution of the contract, both parties shall settle it through friendly negotiation in time.

1. Curtain quotation: Description of the unit price including tax in the sample area: The above tax-included price includes all the money under this order, such as tax and freight.

2. Delivery place, method and time: 2. 1 delivery time: 20xmm DD YY 2.2 Installation place: 2.3 Installation time: working days. Party B shall deliver the goods to the door, bear relevant expenses, and bear all risks of damage or loss of the goods before acceptance by Party A..

3. Payment method: Party B will transport the goods to the installation place of Party A, and Party A will accept the goods on the day after the installation, and pay all the money, namely RMB, within three days after the installation and acceptance of all curtains. Party B shall provide Party A with an equally valid invoice before payment.

Four. Responsibility of both parties Responsibility of Party A: Party A guarantees to provide a clean construction site for Party B to install the curtains before Party B installs them. Within three days after all curtains are installed and accepted, Party A shall pay all the money to Party B according to the contract. If the payment is overdue, Party A shall pay Party B a late payment fee equivalent to 5‰ of the payment amount every day. Otherwise, Party B has the right to submit arbitration to relevant judicial institutions. Party B: Party B is responsible for providing curtains of specified models and providing free transportation and installation services. And in the case of normal use by Party A, the warranty period is free of charge. Party B shall deliver and install the goods according to the model negotiated with Party A. If there is any discrepancy with the original model, Party A has the right to reject the goods that are inconsistent with the original model. In case of overdue delivery, Party B shall pay Party A a late payment fee equivalent to 5‰ of the purchase price every day. If Party B fails to deliver the goods on schedule for more than five days, Party A has the right to terminate the contract and require Party B to bear the liability for breach of contract.

Verb (abbreviation of verb) dispute settlement: Any dispute arising from or related to this contract which cannot be settled through friendly negotiation shall be submitted to Shenzhen Arbitration Commission for arbitration in accordance with its arbitration rules. The arbitral award is final and binding on both parties.

6. This contract is made in duplicate, one for the buyer and one for the seller, and shall come into effect as of the date of signature and confirmation by both parties. The Buyer and the Seller agree that the fax signed/sealed by both parties has the same legal effect as the original.

Party A: Party B:

Signature of Party A's Representative: Signature of Party B's Representative:

Date: Year Month Day Date: Year Month Day