What if the sliding rail of the sliding door is broken? How to take it off.

Below, according to the different situations of sliding doors (also known as sliding doors and sliding doors), the disassembly method of sliding doors is explained in detail:

1. If it is a ground rail sliding door, see the following figure:

Its track (as shown below) has two tracks: the lower track is smooth and the upper track has a deep ditch. The pulley under the door leaf slides in the groove of the lower rail, and the upper end is contained in the groove of the upper rail (with a large gap from the top). If the slide rail is damaged, you can hold the door leaf tightly with both hands, lift it vertically and push it to the top of the upper slide rail, and the lower pulley will be separated from the groove of the lower slide rail. At this time, the lower end of the door leaf is moved outward, and the lower rail is removed, so that the whole door leaf falls, and the sliding door can be taken out.

2. Sliding door with rail (as shown in the figure below)

The rail hanging structure is as follows:

Upper structure drawing: fix it with the upper beam of the door leaf with fixing pieces. When removing the door leaf, just open the specified top screw;

The following structural diagram is to fix the door leaf with double metal clips. When removing the door leaf, you can remove the door leaf by removing the screws on the metal clip.

Sliding doors save space and are easy to use, so they are popular with everyone. But when choosing slides and pulleys, we must choose high-quality products to reduce worries.