Matters needing attention in dismantling non-bearing wall

Whether the non-bearing wall can be removed depends on many factors. In fact, both load-bearing walls and non-load-bearing walls are walls that all of us should pay attention to. The wall is an important support of the wall. There are some small walls at home that can be torn down because they can be repaired.

Non-load-bearing walls are not load-bearing.

Many people think that non-load-bearing walls are not load-bearing, but they are not. Because compared with the load-bearing wall, the non-load-bearing wall is a secondary load-bearing component, but it is also an extremely important support for the load-bearing wall.

Care should be taken when removing non-bearing walls.

As far as Chuangmeihuaqi Home Furnishing Company is concerned, it is not a big problem to remove the non-bearing wall or make holes in the wall, but if the residents of the whole building dismantle and change the non-bearing wall at will, the seismic capacity of the building will be greatly reduced.

Need to apply before demolition

If the owner intends to dismantle the wall in the decoration design, the decoration company must apply to the property department in advance, and the construction can only be started after approval.

Wall thickness should be considered.

Because when building a building, the platform design unit will leave a drawing for the property company, which clearly indicates the thickness and materials of various walls such as load-bearing walls and non-load-bearing walls. The property management company can decide which walls can be demolished and which walls cannot be demolished according to the drawings.

Water, heating and electric circuit should be considered when dismantling.

Removing the non-bearing wall may lead to changes in water, heating and circuit, so these problems should be considered comprehensively in design.